Works banshee info

[HokieBlaster]

I picked up a set of works dual rate shocks for a banshee with a banshee axle for $100 off craigslist and I just want to know if there is anyway to adjust the preload on them

 

[Awk08]

some of the newer models and all rear shocks have a threaded preload nut, the older front models must have the spring compressed to relieve pressure off the top spring cup/retainer, then move the big circlip to different groove positions to adjust the ride height/preload

http://www.worksperformance.com/pdf/instructions/General Instructions.pdf

http://www.worksperformance.com/pdf/instructions/UAADJ Instructions.pdf