wires on carb?

[Racer.Z.]

hey my blaster is basically re wired and all ready to go, except there are two wires comin from the carb that goto a connector. the wires are blak and black and yellow i believe does anyone know where this connects to? there was 1 other set of black and black and yellow wires but it has a diff. connector and its already hooked up to something else

 

[00blaster200]

i believe that is the tors unit. you should probably disconnect it. Almost everyone on here does.

 

[bagds101]

yup tors. disconnect it for sure. you will have nothing but problems with it

 

[Demo4o1]

cause more probs than what they were intended to do

 

[00blaster200]

Its purpose was a safety for if the throttle got stuck, but they fail all of the time

 

[wheresthericego]

Its purpose was a safety for if the throttle got stuck, but they fail all of the time

And the throttle rarely gets stuck...

 

[Demo4o1]

true 15151515151515

 

[00blaster200]

yea it was just another pointless thing on the blaster (like oil injection imo)

 

[Racer.Z.]

so just leave that connector unhooked?

 

[Demo4o1]

i know the 03+ ure supposed to splice them together. but as far as pre 03 i guess leave it unplugged but i'd read in the DIY on removing the TORS to make sure

 

[PikledBeats]

Demo is correct, 03+ must be spliced at throttle