Which jets for these mods????

[2StrokeThis]

hey guys i have a fresh rebuild of .080 over with wiseco piston and full DG pipe and silencer plus i have my airbox top off with stock reeds. What jets should i be running and i also bypassed the oil injection so should my gas/oil mix ratio change? thanks for any help in advance

 

[blasty 95]

230 or 240 should be fine! Plug chop to be for sure!

 

[89blaster89]

change to 32/1 thats what most of us run

 

[Longview]

Gas to oil I'd go, 32-1 or 40-1.

 

[Blaaster]

+2 sizes for the pipe ,+1 for the air box lid + 1 to be safe.

#260 or #270 main should do the job, but plug chop to make sure of it.

32:1 is a good premix unless you are going to push the crap out of it, if so you could use 25:1, but you need to go one size bigger on the main.

 

[2StrokeThis]

thanks guys for your help

 

[Blaaster]

Please follow up and let us know what worked for you, it may help others.

 

[2StrokeThis]

will do. does anyone have a place online where you can buy individual jets?

 

[Blaaster]

Google jetsrus

Did it 4 ya.

http://www.jetsrus.com/

 

[2StrokeThis]

Google jetsrus

Did it 4 ya.

Jets R Us mikuni, keihin, hitachi, holley, jets and carb parts

thanks that places has everything i need so do i need to up the pilot jet as well?

 

[Blaaster]

No use the stock pilot and leave the needle where it is, you may need to tweak the idle some.

 

[2StrokeThis]

No use the stock pilot and leave the needle where it is, you may need to tweak the idle some.

ok i just ordered a 260 and 270. will report back what happens when installed..thanks again