TMD Designworks oil pump cover!

[79 bronco]

This cover adds bling and i like the design on the face of it, and it bolts on great. I also think it looks great from the side view! BUT

It does NOT match the lines of the clutch cover and is VERY gape!

From the front view it looks like big squared block of aluminum that don't belong there. But if you have a right bend pipe, it will help hide that.


Nice bling and looks good in this pic!

Does NOT match the lines of the clutch cover and big gap!

Does NOT match the lines of the clutch cover and big gap!

Does NOT match the lines of the clutch cover and BIG GAP and gap and more gap!

Looks like big squared block of aluminum that don't belong there! But a right bend pipe may help hide this!

 

[jus_me]

I agree.. I have the same cover. The right bend pipe seems to direct the eye more towards the pipe but doesn't rely cover it in any way. I have a polished clutch cover so that also takes some attn away from the oil pump cover. By itself though it does kinda look like a big chunk of aluminum tough.

One good thing about them is that you can run the oil injection still if you wanted, but you would need to cut/fab a hole for the oil lines..

Are you thinking on making some of these or similar ?