stock a arm question??

[speedracinshift]

i have a stock set of blaster a arms that i when to put on a bike that i am building. i got them put on the bike and notice that the bottom ball joint that holds the spindles on are not threaded for the nut thats held on by the carter pins. like all stock arms that i have seen. both lover ball joints look like the top- to where all four would have to have the bolt that slide threw them side ways to hold the ball joints in place. so my question is what type of spindles am i needing i have never seen a stock set of a arms like this at all for a blaster? thanks

 

[brandoz28]

you have 88-89 lower a arms then

 

[super noober]

surprise!!!! tht sucks dude those have got to be harder to find, so i assume the spindles must be different also?

 

[norman420]

Just sold a converted set to a guy on Ebay. He may be looking to shed the bones. Let me know which way you intend to go. I may be able to help you out.

 

[chichi]

do banshee aarms and swingarm fit on a 2001 blaster

 

[feelsoright03]

Hey I have the same problem U have. I just bought a set off of ebay that were listed as 99 arms.


~Teddy~

 

[Brute71]

do banshee aarms and swingarm fit on a 2001 blaster

in short no. Unless you want to go through and modify the frame and what not.