Blasternoob13 New Member Feb 1, 2014 25 0 1 Oct 12, 2014 #1 I bought a 300ex on a 250x frame I have spark but will not fire not trying to tear the top end off unless I know it's rings / piston
I bought a 300ex on a 250x frame I have spark but will not fire not trying to tear the top end off unless I know it's rings / piston
harley1-5 Active Member Jul 28, 2013 3,465 236 115 Elko County Nevada Oct 12, 2014 #2 have you run a compression test?
Blaaster Moderator Staff member Technician Jul 18, 2011 15,384 1,120 165 eastern australia Oct 12, 2014 #3 Check the valve clearances!
rich1 Member Jan 6, 2014 871 79 64 N.C./RTP Oct 13, 2014 #4 Hard to start can mean low compression , set the valve clearances ( intake and exhaust ) and then check and adjust the decompressor cable ( if used) and finally the engine compression.
Hard to start can mean low compression , set the valve clearances ( intake and exhaust ) and then check and adjust the decompressor cable ( if used) and finally the engine compression.