Mounting Ideas?

[nboldman]

Alright so i was at menards today returning some pipe and came across this for 3 bucks so i bought it thinking it could be of use to keep tools in, extra oil/gas, carb jets and such in, but need to figure out a way to mount it on the blasty. It's 14" long x 6" wide x 4.5" tall. I want to mount it under the grab bar/ fra,e on the back of the quad. I was thinking maybe using some steel strips and box off one end and both sides and leave an open end. then use either a hinged steel strap or a leather one to hold it in. If it's even possible at all even though i would like to try it.

 

[nboldman]

oh and i bought another one, blue(in background was blue and grey but i swapped the two so they were both one color).

 

[yamaha28]

If you are going to keep stuff in there you need to make sure of two things.
1. Make sure if won't open while you are riding.
2. Make sure the stuff, whatever you carry, is securely strapped down inside and won't move.

If you got those two down then strap that sucker to your grab bar and go!

 

[nboldman]

If you are going to keep stuff in there you need to make sure of two things.
1. Make sure if won't open while you are riding.
2. Make sure the stuff, whatever you carry, is securely strapped down inside and won't move.

If you got those two down then strap that sucker to your grab bar and go!

Ive got those two figured out. Itll move a little, but not enough to disturb anything. Making dividers out of some old blastic i had.