Ideas for spinning joints

[melanie]

Anyone got any brilliant ideas on how to keep my stud joints from spinning so I can tighten up my castle nuts on the tie rods and a arms without using a pickle fork??

 

[melanie]

Anyone got any brilliant ideas on how to keep my stud joints from spinning so I can tighten up my castle nuts on the tie rods and a arms without using a pickle fork??

 

[Awk08]

.
Ideas for spinning joints

My first thoughts are to watch some Wiz Khalifa videos

But seriously, use power or air.
And air ratchet or a socket on a drill.
I use my battery impact gun.
The key is to spin the nut faster than the ball can. I also pry sideways on the ball to jamb it some

 

[Blaaster]

A great idea is to make sure that the threads are in good condition, the nuts will not be tight to turn then...

 

[DUALSTROKE]

woahhh fb must be dead today. The leak down king is posting non stop here. Hold on lemme google that for you.

 

[melanie]

Lmao wiz Khalifa! So my bolts aren't in the best shape which didn't help. I ended up just hitch pinning them for now so I could at least give it a test right cuz I need to get my jetting set now

My first thoughts are to watch some Wiz Khalifa videos

But seriously, use power or air.
And air ratchet or a socket on a drill.
I use my battery impact gun.
The key is to spin the nut faster than the ball can. I also pry sideways on the ball to jamb it some