Help! Blaster only has gears 1, 2, 3

[Blastyowner8877]

Can someone tell me what could be the issue? Ive just replaced shift shaft cuz it was bemt and did all bottom end seals and replaced a case half because of a big crack. It only had 3 gears previously so thats why i took it apart. Got it all back together and it started amd then only 3 gears again. Does anyone have any suggestions?

 

[Tooloose]

Shift shaft dogs are bent or broken or gear cluster has damage blocking the next three ratios on the gear cluster stack . Disassemble and re-inspect selector forks

 

[Awk08]

does it have a magnetic oil drain plug ?
we've seen them be too long and interfere with the gears resulting in only 3 gears

 

[dirtysquared]

I can second the drain plug being too long. It happend to me once. Try an OEM plug....you might be shocked it was that easy.

 

[Thomas Jackson]

I third the drain plug. That was the issue for me, I believe these fine gentlemen above me helped me out with this. We had an aftermarket magnetic one installed by the previous owner, his "mechanic" was an idiot lmao. You can use the aftermarket one with a rubber spacer or something like that as long as its large enough but I'd recommend going OEM

 

[Tooloose]

Is the drain plug the problem?

 

[Thomas Jackson]

Kinda curious too XD.