I recently bought a Blaster and the guy gave me new front tires that are ITP Holeshot 19x6 -10 is that too small for the front? They are brand new on rims but rims wont fit.
Front tires
- Thread starter Cherokee
- Start date
I had 19's once, supposedly good on a groomed mx track ?
they were horrible and grabbed every little nook and cranny on the trails, I now run 22's and roll over most anything without noticing it
I'd try to find what rims they are by measuring and matching the bolt pattern and try to sale them for that machine, and get 21 or 22's
That is exactly what I was thinking. What would be a decent price to ask for the rims and tires? I'll grab some pictures of rims and tires shortly.
Sorry cherokee but for someone who is a cad technician and you are measuring with a tape measure. You should know that is a no bueno. Plus don't you folks in Canada use the metric system. lol If you want to find the correct stud spacing you need to measure across like an x between 2 studs center to center or inside edge of one hole to outside edge of the other hole and it will give you the stud spacing. Yamaha measures in mm also and 4x156 is the pattern blasters use. Meaning 4 studs at 156mm apart cross wise.
Tape measure was all I had handy. One measurement taken was the center hub opening. Measurement stud to stud cross pattern is 4 5/16 which equals 110mm. So these rims are useless to me. Which I was already aware of. Hence the tire question as the tires are for 10" rims. Thanks
When you figure out what they fit (a must) I would ask $100. That will give you some wiggle room. You can always come down or put best offer later.
Similar threads
