Cheapest rear brake setup

[2001BlasterNC]

I have a budget build blaster I am currently working on 2001 blaster It has a rear caliper but with no internals, I was wondering if there was a cheap place to get these internals or another cheap caliper. Thanks

 

[best]

2001 is a cable rear caliber, can be bought cheap ($10-$20 Craigslist) used. Plus the $20 cost of pads and a $15 cable is a pretty cheap and simple repair.

I've been doing hydraulic with Warrior calipers and master cylinder.
Some fabrication and welding needed. About $80-$100 and hours of your time.

 

[blasterboy91]

You don't need brakes dude. If you need to brake, your not riding hard enough. When in doubt, give it more gas.

 

[best]

If you ain't using brakes, YOU ain't riding hard enough!
Full on, full off, very little in between is the fastest way between two points.
Seriously. If you cannot brake hard coming up to a hard corner, you will have to get off the throttle early.
All your friends will call you "Putt-Putt"... or "Crash"...

 

[2001BlasterNC]

I cant find a cable caliper used anywhere for cheap they have some on ebay for like $100 but I figured I could find something cheaper than that

 

[best]

I bought brand new hydraulic calipers on Ali Baba for ess than $50.
Couldn't find a Warrior master brake cylinder but picked up another make new for less than $20.

 

[2001BlasterNC]

What other calipers fit on the bracket without welding? any? I know obv I will have to weld the Res just wondering if the warrior or any other calipers fit on the disc without any fab

 

[best]

The Warrior/Raptor/Blaster/Banshee caliper will fit with an adapter like this:

Any master cylinder can be adapter with a little ingenuity:

 

[2001BlasterNC]

What the difference between L-1 and L-? I found 2 used ones on ebay