Hi Folks, looking for a bit of help here...i looking at a blaster 200cc for a friend! The bike starts first second kick but was cutting out when reving it! i sorted this issue with the TORS system and it was running fine. He left if outside and water got into the stator area because of a small crack in the caseing. Its start now but wont rev up, this chokes itself. I have remoed the stator and it was completely rusted up, aswell as the fly wheel. i have tested the ohms between the white/red and black and its reading 20.4 ohms. i have tried reading from the black/red to the black and it dosent register. Have any of you seen this before and am i testing the stator correctly. many thanks
Paul
Paul
