blaster chain roller/guide question?!

Discussion in 'Engine' started by shartek, Jan 19, 2009.

  1. shartek

    shartek New Member

    Joined:
    Jan 19, 2009
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    0
    i bought a heavy duty chain guide and roller set from a shop.... i cant get a hold of them and it has a larger roller and a smaller roller.... does the larger roller go on the bottom or the top... same thing with the small one top or bottom???? cause i have the rest of the kit on like the swing arm chain guide and the rear guide but where do the large and small rollers go? top or bottom?


    thanks for your help cause my blaster was in pieces when i bought it....
  2. stephen12091985

    stephen12091985 New Member

    Joined:
    Jan 1, 2009
    Messages:
    4,233
    Likes Received:
    21
    Trophy Points:
    0
    Location:
    (321)titusville,florida
    i would think the bigger one goes on the bottom since the chain is always touching that one.mine dont have any rollers just the guide on the back but i just order mine for the top and bottom
  3. xjma

    xjma Member

    Joined:
    Oct 12, 2008
    Messages:
    1,400
    Likes Received:
    8
    Trophy Points:
    38
    Occupation:
    Hydrogeologist
    Location:
    Massachusetts, USSA
    ??? Mine are stock and they seem to be the same size, top and bottom....
  4. Unstock240

    Unstock240 New Member

    Joined:
    Oct 7, 2008
    Messages:
    739
    Likes Received:
    4
    Trophy Points:
    0
    Location:
    mid Ohio
    I thought both of the top bottom rollers were the same size. The one that goes on the swingarm is the only bigger one. Im kinda confused
  5. 89custom

    89custom New Member

    Joined:
    May 27, 2008
    Messages:
    3,834
    Likes Received:
    34
    Trophy Points:
    0
    Occupation:
    Marketing at Metform intl
    Location:
    GTA, Ontario
    i dont have rollers, bottom shaft is chopped off and tops mangled. not like its hittin my frame anyway.
  6. shartek

    shartek New Member

    Joined:
    Jan 19, 2009
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    0
    yeah the 2 rollers... one of them is about 1/4" larger in diameter.... ill take some pics today and post...

Share This Page