Anyone know How to remove ignition box

Owen du feu

Member
Jun 23, 2015
11
0
32
24
Hi does anyone know how to remove the black ignition key box in the middle of the bars in order to get aftermarket bars and to be able to start the bike without a key thanks
 
Once you unplug the ignition you can start it without the key. No splicing or anything is needed.

As far as removing the whole setup I'm not sure I have an 03 so it's not on the handle bars.
 
Pull the black plastic piece off. Disconnect the wires. Turn it over, there's a large plastic nut on the bottom. Screw it off and remove the switch. If you no longer want it just secure the wires under the hood. You still running a stop/run switch? Otherwise without the key, shutting the bike down will be difficult.