Discussion in 'Engine Mods and Swaps' started by Jaack2000, Nov 7, 2017.
What mods can I put on my blaster that's not so expensive to make it faster
re-chambered modded cylinder head
lightened flywheel there is more
My cylinder iwad
already bigger when I bought it
And how do I lighten the flywheel
Send the flywheel to Ken. Or youtube blaster flywheel. You will find how to do it.
Okay and the cheap but avective mods
They are cheap mods.
Others would be: Ported cylinder, Aftermarket exhaust, Aftermarket intake air-box/filter.
Remove all the crap you don't need on the bike to save weight like: oil injector pump and tank, head lights, tail light, TORS system, Park brake system. Go on a diet. hehe
Removing the air box lid and increasing the main jet in size will give a little increase in power.
You should plug chop to confirm the jetting.
The idle speed setting will to have to be adjusted to specs..
I want to modify my swing arm to make it longer is it going to have any negative effects on my performance
Will a banshee's flywheel work on my blaster
Or a yz
Has been done before and custom swing arms made. Most fail. Is photos and info on here about this and photos of failed arms.
Just buy a blaster one there is some on ebay.
EBAY blaster flywheel. I can see 23 at moment and that was just a fast look.
What mods can i do for its aperince
appearance? Lots of mods. Just look at my blaster I did.
Separate names with a comma.