Search results

  1. S

    Peace

    Well it's been fun fellas. I'm out
  2. S

    Please help with clutch

    so you adjusted the center adjustment rod until teh clutch actuator was pointing at the alighnment point on the cases then locked it in place with the 10mm nut and some thread lock?
  3. S

    These arnt stock!

    those are stock yfz a arms.. they can be fit to the blaster with some work. here's a one that blanner did http://www.blasterforum.com/pics-vids-9/rolling-again-updated-pics-49401/
  4. S

    Full Build

    shock wears work wonders for covering unwanted colors. lol
  5. S

    Dmc Help.

    yes use the stock hanger under the hood. you usually have to adjust the angle it is hanging to get it to bolt up right. just get everything loose, fit it all together then start tightning things
  6. S

    Dmc Help.

    lots of times you have to leave the headpipe loose to fit the pipe. i have def had to give pipes a little persuation in the past for the final fit
  7. S

    i need guidance

    to have a nice stout budget motor for that kind of riding you want to get a head mod, and a borderline dune port job. run ya about 3bills total with piston, bore, port, head, and gaskets. a pipe and carb a can wait. but first you need to diagnose the airleak or lean situation that overheated and...
  8. S

    Qz pro shark rmx performance upgraded

    What????????????????????
  9. S

    feels good to be back on the forum

    welcome back man. still got the blaster?
  10. S

    Fuel/Oil Ratio.

    Yes give me 2 liters of F***S please. lmao
  11. S

    Fuel/Oil Ratio.

    so how exactly do you pronounce FUCHS? lol
  12. S

    Exhaust Smoke

    T.M. Designworks Oil Injection Block Off Kit for Yamaha Blaster - 97-0397
  13. S

    Finished Chrome OEM Pipe!!!

    looks great man. just don't know if i woulda spent that much time on a stocker. but to each his own. lol good job
  14. S

    throttle cable prob!

    I would be worried it would fail and leave me stranded. check this out might help you some http://www.blasterforum.com/carburetor-138/pwk-cap-mod-d-51993/
  15. S

    new reeds/plug chop?

    good deal! grip it and rip it.
  16. S

    new reeds/plug chop?

    You don't need to rejet bc you replace the reeds to do a plug chop you warm the quad up. put a fresh plug in run about a half mile full throttle and pin it in 5th or 6th gear. hold it at wot for a good amount of time. then shut it down at wot(wide open throttle) stop, pull the plug, put...
  17. S

    +2 swingarm

    Update: this arm is SOLD. some newfound power made this a much needed purchase. And with jay's approval (who teaches welding on a college level) it will make a nice addition to my cousins blaster
  18. S

    reed valve screws

    ace hardware if you have one is the best place. sometimes lowes has a decent' assortment of bolts. i would go for allan heads but tha't just me. If someone could help out with size that would be great i forget8-|
  19. S

    +2 swingarm

    I would def grab that over those swingarm shop swingers.
  20. S

    C'mon Son!

    Damn that's an atomic spray bomb