Search results

Cheaper than an ambulance ride! N

Sorry, wouldn't know. N

If your wheels "free-wheel" fine, with the castle nuts loose... Something is up with the bearing stack within the hub. Be sure you have the cone shaped spacer thingy between the bearings. Otherwise I would get a hold of a (measuring) caliper and measure the components of the bearing stack and...

Kudos! I believe there is still many sales to be made. Good work Gents. N

Yep. 1515151515 N

Both. 151515151515 N

I can understand why you are Madd. How 'bout running all 3 off of 1 master cylinder. Been working for me for years. Sent AWK a few of these blocks, if you're interested. N

As Mr. Awk said. I have gotten out of the spindle business. After 30 years of engaging in a lot of work that involves gripping and twisting and pulling with my hands. A 20 set run of spindles leaves me with aching hands for a month. Also looking forward to getting into some more activities...

$112.50 Shipped

OK... Here's #4 of 5. Skipped over 3, need to edit it a bit. More boring than 2. dandt-1.mp4 video by norman420 - Photobucket I'll try to get the last couple tomorrow. N

Be careful what you ask for. #2 of 5 roughboss.mp4 video by norman420 - Photobucket This took the place of water boarding. N

Should have done this a while ago. Would have saved a lot of keystrokes. assembly-1.mp4 video by norman420 - Photobucket The original video was shot in HD and was around 300 megs. Stomped on it 2 different ways to get it down to 30. If this one doesn't put you to sleep, I have videos of...

BANSHEE 87-01 FRONT BRAKE MASTER CYLINDER REBUILD KIT | eBay Yep, that little polypack is the culprit. I've seen the kits for as little as $9 N

I'd put a kit in the MC. It'll pump up in a flash. N

Yes, they will work. I'll also need a ball joint to get the correct depth on the reamed sockets. N

Raptor 660/700 hubs won't work and everything must be newer than '90. I try to find parts that are at least 2000. Otherwise Banshee, Warrior, and Raptor 250/350 are what you are looking for. I haven't found a yamaha caliper (again newer than '90), that doesn't work. N

No 151515151515 N

Didn't I see her floating down the street in the Macy's parade? N

Mr. paint the house, Blaster spindles don't lend themselves well to Burgard arms. I have reamed many sets of Banshee/Warrior/Raptor350 for these arms. I made a fixture for reaming them on a Bridgeport so the front end geometry can be as good as it can get. With the extended length of the...

answered on my page. N