Search results

if you have a good running blaster swap the CDI to yours and see what happens. I had a banshee with a bad CDI and drove me CRAZY cuz i would run fine then sorta run or just cut off, i replaced it and it ran like new. but id still do a leak down, i think there is a diy thread on how to make one

you can heat it up alittle bit and it might bring them up so you can see them but not too much heat. I know here in MO you can apply for an abandon title it takes like a month and 60 bucks check and see if you can apply for one (call local police first and have it ran to make sure its not...

Did it leak out the gear oil? Depends on how long you rode it if it lost the gear oil because if the gears in the trans get too hot (no oil) they could lose there temper and be trash not to mention bearing failure but thats worse case

Ok just picked up a whole banshee rear brake set up today. I already fabbed a bracket for a yz caliper but what im looking for are some pics of how people have fabbed up mounts for the master cylinder and rezzy cup. I know what to do just would like to see some pics of other set ups for more...

yes noober this again lol cool figure ill rebuild em and use em

What are some opinions on the v force 2 reeds. The other question is the reed cage supposta be a loose fit intake plate part of them or should they fit tight like the v force 3. I got a set for free and am just wondering if its even worth my time to mess with it.

Two words caused this...cast piston. Cast pistons are known to crack or shatter like yours did. Go with a wiseco there a forged piston and are alot stronger and lighter then cast.

I have an eaton M90 supercharger off a GM 3800 engine, probably needs to be rebuild. cleanin stuff out need to get rid of it. O also have a complete but in pieces 3800 series2 non supercharged 9C1 engine needs rebuild. Let me know if you want anything

ok i know the DT motor is basically the same just water cooled and afew other things. my question is, are a DT piston and a blasters the same?

hey i got an extra set of front works rezzs

hey me and some buddies are goin down to st. joe tomorrow. if anyone feels like ridin come on down.

ya agreed, there should be a dot on the pressure plate and the inner hub line those up. also you put that "wavy" ring back in right?

LMAO, this one was on a radio station around heres little segment call "freak of the week" LMAO.....sick f@*ks

ya and you could really smell the trans oil, it didnt smell like just 2 stroke oil. ya ive tried flipping it around and theres almost no marks on it either. it fits in the seal nice and tight too. idk what to do now im out of ideas of wat it could be

lol ya i know your not suposta use rtv, i used it on mine and it works great figured it was worth a shot. naa the engine blew a piston up and had two small cracks in each side of the case. i had the welding teacher back at my old tech school tig them up. i cleaned up the welds and had a buddy in...

im building a engine for a friend of mine. i split the cases cleaned everything put in there new crank, bearings, etc. well i get it all back together, throw it in my bike to test fire it. it starts awesome but was burnin tranny oil, so i took it all back apart and resealed the cases. long story...

ya i got it i was ganna call them and see if i can get more info. can you see if you can talk to your buddy about it and see what he thought of it. its alot closer then st joe

thats norm as long as its not alot of movement

there a great deal at that price. if you get them rebuild the master cylinder, and take the calipers apart or atleast blow air into them to make sure there not froze (they do that if they sit too long)

GET THEM! there from a 03-06 banshee. you just need to find spindels and hubs