Search results

  1. quam

    blasty and riding gear

    i'm interested in the crank. anything wrong w/ it? you think it might be a-m, is it stock stroke? also, i'm looking for an axle for an '03-'06 if you've got one.
  2. quam

    parting out 02 blaster

    hey man, i've just found out that the '02 axle won't work w/ an '06 bike. thanks anyways man.
  3. quam

    Banshee axle in 1989 Blaster

    i'm considering doin this swap too. i've got an '06 and am hoping that the stock hubs on both sides will work w/ the banshee axle. will post up results. anyone know the difference in width? i've already got wheel spacers (the good ones) and offset wheels and i don't really want to go too wide....
  4. quam

    G-Force adjustable axle for sale

    man, wish i had the money cuz i f*cked my axle last week and need to replace, but not trying to spend that kinda dough. if you got a stock '03-'06 axle, hit me a pm.
  5. quam

    Wally Lights Install *tons of pics*

    i did this mod too, mounted mine on the fender bolt as well in the little valley. w/ the 25 watters, they are pretty bright. brighter than stock for sure. i've got mine wired to run as low beams and kept the stock light's hi beam. visibility is def increased except for the fact that because...
  6. quam

    DDIY!- Cylinder Porting

    keep in mind that when you raise the cylinder, it'll affect your transfer timing. also, if you're running a mid/top end pipe, why not port the cylinder to match the pipe? mismatching porting w/ the pipe is a debilitating error. but great thread man. and def looking forward to the vids!
  7. quam

    Bunch of parts

    got an axle for sale? if so please pm w/ shipping to 27606
  8. quam

    Race Ready Blaster Part Out!!!

    i'm interested in an axle. pm me if you got one for sale, i'm in 27606.
  9. quam

    parting out 02 blaster

    well, if you've got a true axle, i'm interested in it. hit me a pm w/ price shipped to 27606 man.
  10. quam

    stuck dowel pin

    nah, studs are easy to pull. you might need to have a breaker bar handy...
  11. quam

    Torque Adders.

    i like 400exs. my buddy has one that rips mine up every time. and mines pretty damn built. i think if i do a 240, i oughta be able to keep next to him though. the suzukis are great too. both suzuki and honda make a very reliable and finely tuned machine. as for quick and easy torque. i'd...
  12. quam

    holes in cranck case

    seems to me jbweld would melt off....not just due to the heat but also the oil. i'd say this depends on where the holes are....post up some pix. most likely welding would be ok, but if the holes are small enough, brazing would probably work just fine w/ an oxy-acetylene or MAYBE even propane...
  13. quam

    How much power do you gain when ported and polished?

    damn, burnin oil, but it seems to me that if you do ALL those mods, you oughta get more than 18 ponies. kennedy built a 50 hp 240. that's about 33 hp increase. seems to me that if you're gonna spend all that dough on all those parts/labor, you might wanna consider researching a few more...
  14. quam

    parting out 02 blaster

    damn, i was just gonna say that i'm VERY interested in buying the axle, but you just said that it's bent....
  15. quam

    Won't start once warm? And mix ratio

    huh? why not just turn em off? you mean the lug nuts on your wheels right? you can use and impact gun, breaker bar, ratchet, neumatic ratchet........ as for the plug prob. if the plug was carbon or oil fouled, it most likely will happen again real soon. find the reason why this happened...
  16. quam

    case splitting

    sorry dude, wrong. leave the tranny on the clutch side. you want to pull the primary drive gear ,but leave the clutch and kickstart idler gear installed. this will keep the tranny in place inside the case. pull the left side (ignition side) off then pull the crank out of the right side...
  17. quam

    Question about K&N Air Filter

    sorry guys, you're wrong. there is no need to rejet the main jet cuz of an air filter. the main jet only affects the 1/3 to wot range (including the affect on the needle band), usually upgrading the airfilter doesn't lean out the mixture enough to be beyond the capabilities of the stock pilot...
  18. quam

    flotek trail port job

    p&p is a huge gain in power. it's like a cam upgrade in a 4stroke. i got my work done by kennedy_power and she kicks WAY more ass!
  19. quam

    listen to this

    so now you know that there are crank seals on both sides of the crank before you run off and order new ones up, go out there w/ a can of carb spray and pull the stator cover. start the bike up. get her warmed to the point where she's revin up real high, then spray the carb cleaner behind the...
  20. quam

    Difference between milling and rechambering head?

    ask any builder who knows the fundamentals of 2stroke performance....the blaster's stock head design is completely wrong. it actually inhibits the motor from functioning properly. the squish band and angle is all wrong. the motor has so much more potential for compression and, subsequently...