Search results

  1. B

    Fmf pipe leaks

    Any ideas
  2. B

    Fmf pipe leaks

    Has anyone made a custom exhaust flange for the fmf pipe that utilizes o-rings to seal it
  3. B

    Fmf pipe leaks

    It’s not between the cylinder to flange connection it’s leaking from the flange to pipe connection
  4. B

    Fmf pipe leaks

    i don't know if its called copper rtv but its the high heat silicone that is copper colored
  5. B

    Fmf pipe leaks

    i did all that i have a strong spring it was really clean and it still didn't work
  6. B

    Fmf pipe leaks

    Okay so i have no clue how everyone can get their fmf pipes to not leak between the flange and the head pipe because I tried the copper rtv and it just disintegrated after the first couple rides. I tried copper flashing and wrapped the flange and forced the pipe over it, that wore out too. I’m...
  7. B

    Jetting?

    Well the only reason I moved the needle clip was because it wasn't in the correct position and the jet had to be changed for obvious reasons lol
  8. B

    Jetting?

    Do you guys think that a 310 main is too rich for only a fmf pipe and boyesen carbon fiber reeds woth an open air box with a moose racing air filter? I took the quad for a ride today and it seemed to perform well. I did notice that the throttle response was slower than it was before I rejetted...
  9. B

    Carb leaking please help

    I’ve tried every trick there is and still leaks I have a feeling there’s something wrong with the position of that overflow tube in the bowl
  10. B

    Carb leaking please help

    Tusk carb rebuild kit and OEM float
  11. B

    Carb leaking please help

    And that may be why I can’t get the gas to stop leaking out without setting the float wicked high
  12. B

    Carb leaking please help

    Could someone help me out and measure the length of the overflow tube in their bowl and also how far away the tube is from the front of the bowl? I’m thinking that someone could’ve either cut the tube shorter for some stupid reason or the tube is bent forward therefore pushing it down into the gas
  13. B

    i need a jetting estimate

    Right now mine is at 23mm to finally get it to stop leaking
  14. B

    Carb leaking please help

    How out of level would it have to be and in which direction like for example if you were sitting on the quad and it was tipped a 1/4" to the right would that throw it off that much
  15. B

    i need a jetting estimate

    What is the float height supposed to be
  16. B

    Carb leaking please help

    I already thought of that and checked it and it wasn't leaking from there
  17. B

    Carb leaking please help

    Its not leaking out of the drain screw
  18. B

    Carb leaking please help

    Just rebuilt my whole carb, new needle, new needle seat, new bowl gasket, new float, float height is set to the highest setting within the tolerance(21.5mm to leave the least amount of fuel in the bowl as possible) and the overflow tube in the bowl keeps dumping the gas out. I'm really getting...
  19. B

    i need a jetting estimate

    Hi all, I have a 2001 blasty and i need to rejet my carb as of now i have stock 230 main jet mods: full Fmf header and silencer (have not installed yet due to stock jetting) open air box w/moose racing air filter putting in boyesen carbon fiber reeds on stock cage i don't belive there was any...
  20. B

    Fmf jetting

    its a used pipe so it doesn't have instructions, its an mf silencer i believe its a turbine core II but i will probably shorten it and basically just turn it into a powercore II