Search results

All I have is the brake lever I need everything else. 00 blaster

I don't have the tor on my blaster and I don't have a brass screw on my carb either?

How much are you asking? I need a good carb for my 2000.

Every time I hit the has as it bogs down I put my hand behind the carb and notice it's blowing air back out toward the air box and my hand got soaked with gas. Also attached is a pic that looks like a hose belongs there ? Also am I missing something on the black part as well?

The 240 jet is in right now. Gas does not leak out. Im not even sure if the problem is the carb anymore.

It idles high

Just got back to the bike. My 240 jet did not fix the problem. Started up great idle fine then if I hit the has half way or more it bogs down . i believe my compression was at 110 120 and I am getting good spark. I have a new coil on there too. I don't know if my needle seat is leaking but will...

I put a washer under the jet then adjusted the floats high and low and it did the same excate thing. I ordered a stock jet for 5$ to see if that helps. I'll be back at it next weekend

It does not leak gas only if I remove the clip from the third notch and set it anywhere else. I never set the floats and don't know how. Also I don't remember there ever being a washer in the carb or with my jet kit.

I Bought a 00 blaster about a month ago from someone who couldn't get it started. I managed to fix the ground and got it started. Then I changed the jet to 290 because the bike has fmf exhaust and is supposedly a 260. When I removed the bowl the bike didnt even have a jet in there. Anyways I got...

Invoice my PayPal amtruckingny@gmail.com

50 bones

I need a front tire without the rim and rear brake setup

How much for the complete rear brakes minus the pedal.

I could use one. How much? Message me

i grounded the line and still no spark. the stator has 4 wires coming out of it.

Yes my harness is missing a lot compared to the pictures of other blasters. I think I'm going to buy a harness on eBay which is the same year as my bike and go from there. Will be back in a week with updates

just bought a 2000 blaster the other day. motor was machine shopped and put back together but isn't getting any spark. before I start spending money I would first like to make sure all these cut wires aren't important. does this look ok? isn't that yellow and black wire suppose to have a...