Search results

  1. 400ex killer

    iOS stock carb

    Anyone got a stock carb for sale?
  2. 400ex killer

    Hockey puck seal driver

    I don’t know if this will help anyone but I was having trouble driving my crank seal in with out deforming it or driving it in uneven. This is mostly to do with the fact I have the crank in the way. And if I had to smack it a little harder the socket would indent seal. I had a couple old but new...
  3. 400ex killer

    Piston hitting head gasket

    67.50mm
  4. 400ex killer

    Piston hitting head gasket

    old gasket is gone and he used a milling or Lathe machine i don’t remember. And yea I popped the head back off and piston pushes the gasket up and makes contact. I have my old piston that is the same size and gasket didn’t fit around it. Probably just gonna have to call him and give him the...
  5. 400ex killer

    Piston hitting head gasket

    So I’m running a +4 stroker crank and I had to do a complete rebuild due to case leak. Got her all back together but piston hits head gasket. Last time the engine was built by KOR and I’m assuming they shaved the gasket.(watched a video of him doing this due to this common issue) How could I fix...
  6. 400ex killer

    04 up nose

    looking for a 2004 n up nose because my 01 does not fit on the 04 frame. Blue would be nice but it doesn’t matter.
  7. 400ex killer

    2004 brakes

    Ok cool thanks @Awk08. I’ll start looking for the right one on eBay.
  8. 400ex killer

    2004 brakes

    Does anyone out there have a pic of what the brake set up looks like. I got a 2004 frame off eBay and can’t find a pic online of what is different. Banshee master cylinder and eBay one does not line up with holes. I welded brackets on my 01 frame for those brakes so not really sure what it...
  9. 400ex killer

    Blaster parts/banshee parts

    This is the third time I’m trying to post a reply I don’t know why it won’t upload but I’m gonna leave the pic out this time. Sorry I do not have to kit any more cut up the a arm brackets and currently using shock brackets. Also figured I’d let you know the kit is trash and stupid dangerous...
  10. 400ex killer

    Blaster parts/banshee parts

    No sorry and the kit is trash anyways. Lowers the quad front end too much and flattens the quad completely.
  11. 400ex killer

    Blaster parts/banshee parts

    Sorry there on my quad I gotta figure out how to delete this post because most of the stuff is gone or on my blaster.
  12. 400ex killer

    Help with jetting

    Ok thanks for the help. I will be leakdown testing this coming weekend. Then following the process that was posted by @Awk08.
  13. 400ex killer

    Advanced timing

    Yea I read that one and wanted to go to the max advanced position with my build. Just trying to squeeze everything I can out of her lol, thanks in advance for the help.
  14. 400ex killer

    Help with jetting

    Also should add my clip for needle is set in the middle right now(I think it’s a odd number of slots so maybe not dead center) and my back yard is literally the ocean. I think tomorrow I’ll do the plug chop for main and maybe work backwards (I know this is not the right steps but my main may be...
  15. 400ex killer

    Help with jetting

    @Awk08 yea I got the slide and needle jet, but 65 pilot was good at 3 turns out (this was judged by sound not riding) so I dropped down to a 62 and anything over 1.5 turns out rev hangs like crazy but even at 1.5 if I give it full throttle from a slow cruise it has no power for two seconds then...
  16. 400ex killer

    Help with jetting

    quad is heavily modified, running 35mm pwk airstriker. At sea level. Ran ok 50 degrees 160main 62 pilot. Never had the jetting so good to where if I snapped the throttle from a putt it would stand strait up(it should throw me off) Now it’s in the 30s /40s and it still lacks power on...
  17. 400ex killer

    Advanced timing

    I know there is a thread for this but can’t find right now. How far can I truly go 7-8 degrees advanced?
  18. 400ex killer

    What Jets Are You Using

    So there's your answer ...amazon ......ask people on here to get a carb ..sh*t I got two with complete rebuild kits still in packages that I have no use for ...I'm sure you got the carb for cheap so it's probably not right so either go to local store and just try different jets and find brand...
  19. 400ex killer

    What Jets Are You Using

    So next question where did you get the carb?
  20. 400ex killer

    What Jets Are You Using

    Cheap jets or oem ?