Search results

  1. x-man

    gas mixture 60.1

    well to start i have the a compression tester with the spark plug adapters but i dont have the plugs to block off n iv never used it before n to be honest iv never done a leak down test my self iv seen ppl do it but thats it n as far as the idle i still have the tors on the carb so wen u say...
  2. x-man

    gas mixture 60.1

    That's exactly what I just did I drink my gas tank I mix 32 to 1 put it in it took a little while to run through the carb but it went back to a normal idle and I went up and down the street again good power decent throttle response and then I come back in and go to neutral and it kind of shoots...
  3. x-man

    gas mixture 60.1

    this site is a pain in the ass when I was going up and down the street and I came to a stop and put it in neutral it was running High like it was low on gas is that because of the mixture the air y do u say check for air leaks??
  4. x-man

    gas mixture 60.1

    Hey guys so I recently picked up a 2011 KTM 65 for my son runs great awesome that's great but it runs 60.1 now I was talking to the guy at my shop and I was telling him that I didn't want to have to gas cans mixed all the time and he said if it's Amsoil you can run 60.1 and your blaster with no...
  5. x-man

    98 blaster frunt brake perch

    Hey guys I was wondering if you found any Clutch and Brake levers that you can get rid of the brake perch and parking brake and get a much cleaner look that are not the 170$ unbreakable ones
  6. x-man

    carbs-tors but no air srcow

    well 1 i just got a message back from the guy that i got it from n he sed that he never had one n that it runs fin without it n to be honest drilling into my only cab always sketched me out but now that i have a second one i may try it but original bc i didn't want to do it my self i want to my...
  7. x-man

    carbs-tors but no air srcow

    hey so i didnt get back to u but it is the idle screw not the air my bad but ill try n get a pic on here this sit is a pane but ya basically it dosnt have the idle screw that comes with the kit he sed that its tors deleted the tors brick is off but i didn't see the idle screw
  8. x-man

    carbs-tors but no air srcow

    hey so i just got a oem blaster carb n it has the tors off the top its got the cap on it no throttle cable i have to get it but it dosnt have the air screw that u drill in n tap so im asking if any one has a blaster with a carberater that dose not have the tors but r using the original air screw
  9. x-man

    extended a arms??

    hey if i get the plus 3 a arms do i deen to get spindles as well i no i need the plus 3 tie rods but im not sure about the spindles
  10. x-man

    rear brake conversion question

    Hey guys so I converted to hydraulic brake I got the bracket everything mounted it works but it's a Banshee brake line and it's about 2 to 3 inches longer than I want I've seen plenty on eBay and online that are stock or even longer but none that are shorter any suggestions on what kind of lines...
  11. x-man

    Leak down tester question

    Hey guys I have the leak down tester that goes into the spark plug I want to know if you have to block off the exhaust and the carburetor and how do you do that to you really need to take off the exhaust and carburetor to do a leak down test
  12. x-man

    buying a new engine??

    dose anyone have advice on gettinga new engine iv see some on eBay i was going to look at one of the engine builders kocr to see if they had any
  13. x-man

    engine compression?question

    ya uv got a point but want riding on Friday was out for about an hour and a half not when I got back and loaded it in the truck I noticed was missing a mounting bolt for the silencer but no biggie just need to get a new boat and got home next day pulled it out power washed it started looking...
  14. x-man

    engine compression?question

    ok thats pretty much what i was thinking thanks
  15. x-man

    engine compression?question

    Without doing a compression or a leak down test what are the signs that my blaster engine is having compression problems btw i no that a 2stroke owner should have a leak down tester but i just havnt gotten around to ording one off eBay its just being lazy going to get one asap tho but ya what...
  16. x-man

    Wheel spacer bolt pattern?

    If I get the write hubs that will give me + 2 and with 10 11 rooms I think that would look and handle okay no?
  17. x-man

    Wheel spacer bolt pattern?

    yeah I understand the difference between the right way and cheap way butt I would think that I could do the hubs and the rims now and then do the axle later it would give me a little bit of with for now because right now I have a 3 inch gain in the front and I'm completely stocked in the back...
  18. x-man

    Wheel spacer bolt pattern?

    Well what do you suggest and what do u think would be cheaper in the long run i understand tires r another story
  19. x-man

    Wheel spacer bolt pattern?

    p.s also possible extended swingarm but that is a expensive purchase maybe if im lucky
  20. x-man

    Wheel spacer bolt pattern?

    yes it is have the Diamond J customs widening kit with trx450r shocks front and rear ppl say there sketchy but iv never had a problem with it yet but i have those yfx hubs in my eBay cart but what are the two different patterns? so i no what kid of rims to get? it sucks cuz a few months ago i...