Search results

  1. MasonBraaps

    Clutch will not dis-engage

    Fixed! I went to my old blaster bolt bin and found all of the old washers and spacers I needed. Thanks to awk’s idea about the washers i figured it out. The spacer on the right is what came in the bike and the washer on the left is the correct oem one. Thanks everyone for your ideas, hopefully...
  2. MasonBraaps

    Clutch will not dis-engage

    Yep all plates removed and the inner hub will only move with the basket... I’m gonna order all new oem washers and also check out the drive gear and kickstart whenever I go to put them in... gonna take a week or 2 to ship because I’m in Canada. I’ll update everyone then. Thanks a lot guys.
  3. MasonBraaps

    Clutch will not dis-engage

    I already replaced steels, been through assembly 4 times. Has anyone ever heard of the basket somehow being prevented from seating all the way, maybe the primary drive gear is effecting it?
  4. MasonBraaps

    Clutch will not dis-engage

    Yep they’re soaked. As I said in my original post, should the basket and the inner hub spin separately from each other when’s there is no pressure on the plates? If they’re supposed to they don’t. Correct me if I’m wrong but when the clutch is dis-engaged, the basket should move with the...
  5. MasonBraaps

    Clutch will not dis-engage

    Well I just reassembled it all with a different set of steel plates, made sure everything was correctly assembled (pushrods and ball bearing as well) and adjusted it perfectly. I saw the plates seperate when I pulled the clutch in again. Put more yamalube 10w-40 in and started it up and warmed...
  6. MasonBraaps

    Clutch will not dis-engage

    Thin first then thick behind the basket is what it looks like to me, let me know if you think otherwise. Thanks!
  7. MasonBraaps

    Clutch will not dis-engage

    Thanks! That’s something I’ll have to try. Was it the steel plates or the friction plates?
  8. MasonBraaps

    Clutch will not dis-engage

    1990 blaster Clutch will not dis-engage what so ever. -no the ball bearing is not welded to the push rod -yes the actuator is in good condition -yes the basket is filed and smooth -yes it is adjusted correctly inside and out -yes it is assembled correctly -yes the dots are aligned -running...
  9. MasonBraaps

    Crank seal won’t come out (clutch side)

    I’m replacing crank seals, stator side came out fine but the clutch side will not come no matter how hard I try and yank it out with a pick.. any tips or suggestions would help, thanks!
  10. MasonBraaps

    just my bike

    96' Blasty :P -Full FmF pipe -Dual Stage Boyeson Reeds -Dyno Jets -UNI Air Filter -.60 Over Bore -Fox Bars -DG Nerf Bars
  11. MasonBraaps

    Carb Holes

    Yea I have the brass eyelets on an old junk carb :)
  12. MasonBraaps

    Carb Holes

    Thanks a lot awk
  13. MasonBraaps

    Carb Holes

    Any lines I'm missing?
  14. MasonBraaps

    Carb Holes

    Can someone just tell me whcih holes are for what and if i need them attached to anything, Thanks!
  15. MasonBraaps

    Fresh Rebuild Start

    It does have that spark...carb dosent drip...exhaust is good...haven't leak tested
  16. MasonBraaps

    Fresh Rebuild Start

    I've tried a few plugs and no change so I'm pretty sure that's not the problem...any other suggestions?
  17. MasonBraaps

    Fresh Rebuild Start

    If the plug has good spark, its fine then right?
  18. MasonBraaps

    Fresh Rebuild Start

    Looked at them and they seem fine
  19. MasonBraaps

    Fresh Rebuild Start

    thanks ill try that
  20. MasonBraaps

    Fresh Rebuild Start

    Do I have to replace any gaskets or anything like that it is it just four bolts that keep it good?