Search results

before i ruin my gas tank i wanted to ask you guys on here. so as all of you know 2 smokers suck on gas and when me and my buds go for a long ride i have to strap a gas can which i hate to do, so my friend said to fill your gas tank with hot water maybe even boiling and figure out a way to...

ya that should work i buy my pistons first and give it to my machinist so after he does the bore he can check the clearance on the cylinder wall, but ya if it was bored to 68 then that piston should work

I was gonna ask around on here its got FMF header and that silencer so I took out the 230 main jet and put a 260 in seems to run great has fresh top end beats up on my 400ex on the track and trails just not in the sand pits

Here's a pic

well after breaking the grab bar and silencer off doing 4'th gear wheelies i fabbed up my own grab bar pretty simple then took some 2 and a half inch steel pipe welded the metal baffle to the inside of it packed it with new packing then welded a peice of 1 inch pipe out of the baffle and a...

Thanks im new to these smart phones

ok ok sorry will someone tell me if its working now jeeze this is hard to post 1 video

im a good mechanic not a good at computers sorry

ok used my youtube account to upload the video see if its working

oh ok is there any other way to post vids i fabbed up my own silencer sounds great how else can i post a video

its a video click on the screen and it works

haha ok i think were getting to cheap here!

Thanks guys ill hmm ill check it out thanks

ya that vent hose was 2 bucks and i got 2 uses out of it

i used part of my gas cap vent hose and it fits perfectly on my gas line from the petcock to carb i know its kinda dumb but looks better than the yellow clear one

ok on my 06 blaster this problem happened twice after riding hard like when i hit a big jump or blasting over whoops my carb starts overflowing like mad pouring out of the top overflow i just bang the carb with a rock and the floats seat. The carb is clean and floats are set right. I was...

yes the gasket on the cap is seated well no leaks, i did blow compressed air through main jet and the choke tube, now you got me thinking maybe i didnt blow through the pilot jet i did soak and spray down with carb cleaner. today i disconnected the tors system to see if that would help the idle...

i tried that still will stall but im just gonna have to keep it idling i think im gonna buy a whole new carb with the tors removed, now maybe the problem is my needle? not getting enough fuel also i noticed my slide was silver and all that black which im guessing is a silicone to make it slide...

im mixing at 32 to 1 i pulled the carb blew out all jets with air soaked carb in cleaner put it back together bike runs much better starts on second kick revs better still wont idle but definatley runs crisper. forgot to look at the jet sizes i have a good guess its all stock though. fun bike...

right above the slide its all over the spring and top gasket ok ill clean it tomorow and get back to you on the jet sizes, i just ordered a carb rebuild kit to it was only 15 bucks came with gaskets needles springs etc thanks