Search results

  1. Blasturd

    crash turns into full rebuild

    Nice Job! I like how clean that quad looks! I love the new body style! 5.3 or 6.2?
  2. Blasturd

    Exhaust stud problem

    Only proper way in my book is to put a Heli-coil in it!
  3. Blasturd

    Shifter upgrade of sorts

    It looks like it sits too far in toward the motor?
  4. Blasturd

    YFZ450 heel guards

    Ive never seen a front bumper like that that's held on with hose clamps!
  5. Blasturd

    identify if possibly?

    From the large long outlet cone to the long one that your fender support bracket goes across in the pic i count same amount on both pipes. Exact same pipe that i have. I think youll like it better than the toomey!
  6. Blasturd

    Swing arm

    For trails I'd say stick with a +2 or +3 And depending on what youve got for rear brakes youll need an extended brake cable or brake line! As well as a longer chain
  7. Blasturd

    What type of header is this ?

    I would say judging by the flange side of the pipe that it is a dg
  8. Blasturd

    Engine trashed in an hour...

    You said you did a plug chop and it was a tad rich was that before the rebuild and porting?
  9. Blasturd

    YZ250 Blaster Build Log

    How is it going to work out to plumb the radiator all the way back from in front of the suspension? Just something to think about.
  10. Blasturd

    itp ss212 wheels

    If you are talking about rear wheels Your best bet would be to get a 9" wheel that way there's plenty of options on 20" tires for trail riding.
  11. Blasturd

    Tors delete idle setting

    Ive had zero troubles with mine backing out. I dont just tighten the nut i turn the screw in with the nut at the same time. it raises the idle just a tad bit but helps to make it tighter.
  12. Blasturd

    What type of tranny oil should I use?

    Or just get a 10w-30 4 stroke atv/motorcycle oil its intended for use in a wet clutch Napa should carry it in Valvoline
  13. Blasturd

    YZ250 Blaster Build Log

    Subscribed! This is gonna be a fun one to watch!
  14. Blasturd

    Start Up Problem

    Installing a new plug does not mean it has spark. You need to check for spark. There is no engine oil to drain and replace there is only trans oil!
  15. Blasturd

    Start Up Problem

    have you checked for spark?
  16. Blasturd

    Brake Fluid

    DOT 3 And DOT 4 are compatible with each other. No worries!
  17. Blasturd

    41mm intake

    Like a STIHL!
  18. Blasturd

    41mm intake

    And how would you feed it oil?
  19. Blasturd

    Push rod

    What is it that you are calling a pushrod? And axle rod?
  20. Blasturd

    REmoving decals with success?

    Ive used super 77 on graphics on the back fender of a dirtbike and it worked great, i sprayed the backside of the graphic and let it set for awhile till it was extremely tacky then applied.
Top Bottom
Back