Search results

Some of you may have seen the rebuild I'm doing to my spare parts blaster. I got it put together enough to start it just now and I went to do the heat cycles on it. All was going well. It was a little blubbery off idle but good enough for heat cycles. Now here's the problem. It just out of...

Like the title says, I'm looking to see if anyone knows what size o-rings the Vito's fat bastard pipe takes. They are the o-rings that seal the expansion pipe to the cylinder flange. They usually disintegrate when you remove the pipe so you have to get a new one each time you remove your...

It's been a while since I was last on here so I will give a quick background again. A few years ago, I bought 2 blasters in pieces from a family friend for $200 and a brand new, in box vito's +3 crank for $100. To my surprise, one of the torn down blasters had a 240 BB cylinder. So I decided to...

So I picked up this 1986 TRX250R yesterday. I've always wanted one since I was younger so I couldn't pass up a decent deal on one so I could eventually put in the work to make it the best looking and driving 250R I can build. So here are the pictures of how I got it. The plastics are...

so I got a question. The pipe on this 250r I bought is a sparks mx pipe and is apparently THE pipe to have on a 250r but mine is cracked real bad near one of the mounts and causing a severe exhaust leak. I can have it welded at work but I wanted to know if there is anything special about welding...

These are just a few things that I know I will need to get my parts blaster back into a fully functional blaster. Any of these items would be appreciated. stator cover seal swingarm bolt & nut -- Purchased kickstart & nut

Since they are HUGE files, I will have to post the rest after they upload but we got some video of riding in a park 40 miles from where I live. The first video is what my cousin got with his GoPro. He rides a z400. He gets a few shots of me going up some hills on my blaster. In this first video...

I was just wanting to know what the pros and cons are of doing the bearing roller mod. I was in a pinch a couple weeks ago and needed a roller fast so I found the thread where a guy shows you how to make your own rollers out of reinforced plastic hose and heater hose. Worked for my ride I went...

I'm looking for the little rubber-like mount that connects the top of the exhaust (expansion part) to the frame. Mine separated last ride and they want $20+ for one online plus shipping. Just wanted to see if anyone had one lying around that they don't need. If you aren't sure about what part...

I ordered this tail light last week to put on my blaster: http://www.ebay.com/itm/311528827850 I wanted an LED tail light because they are bright and don't take as much to power them. My blaster is an 04 so it has the problem where my lights dim real bad when trying to power the brake light...

Looking for everything for the parking brake expect the clutch perch stuff. Need cable, lever, bolt, lock nut, and whatever else there is in there. My bolt was broken off, the cable arm and what it splines with are rounded off, and my cable is rusty. I am willing to cover shipping and maybe a...

Its been a while since I was on the forum but I am now working again in front of a computer a lot. My new work has a very nice powdercoating setup (biggest oven within about 150 miles) so I was thinking about doing some powdercoating of things like grab bar and bumper and maybe a few other...

As some of you have seen, I've been working on my build for about 6 months now and I've finally zoned in on the jetting. You guys have approved my plug chops and everything. I've finally put about 2 tanks through it and I'm ready to GIVE IT HELL!!!!..........but..........it just wasn't there...

I am about to go look at a kfx 400 for damn cheap and it has stage 4 elkas that he said were from his buddy's ltz. I know that the rear will bolt up just as easy as the 400ex to my blaster but I was wanting to know if the fronts will work with something such as ASR +3+1 long travels or any other...

OK guys, I'm finally to the jetting part of my build. I got jetting suggestions before for my 35mm air striker that said 50-52 pilot 155-162 main CEL needle #6 slide I got all of those and leak tested so I went to start jetting it and I'm only on the pilot/air screw. I started with what I was...

I am currently leak testing my blaster and I know I have a leak because it will loose about a pound every 15 seconds. I got a spray bottle with soapy water and sprayed every square inch of my motor and the leak tester to make sure. I put my finger on the crankcase vent tube to make sure it...

I am in search of a right foot peg for an 03 or newer blaster. Mine is bent real bad and will probably never mount back on my heel guards. I would also be interested in buying the plastic guards that extend down from the rear fenders if sold for right price. Still in search of a tail light as well

I'm looking for a few parts to get my 04 looking nice since the motor was shipped out to Ken and now all I have to do is wait. I'm in need of an 03+ headlight assembly and tail light. The rear grab bar I wouldn't mind being factory but I won't be picky. Mainly just want something so it looks normal.

As some already know, I've talked to KOR about getting my 240 stroker build set up. I am going to be doing some of the work for it soon and thought that while I'm waiting on some parts I would ask for some advise on other parts I'm looking for. After the stroked 240 is built, I want to run the...

Ok I finally went out and got a blaster I can officially call my own. I got it for 100 from a friend who just wanted it gone. Apparently he bought it not running and put a working bottom end on it and tried to rebuild the top end himself. He said there was scared and tried to hone it out but...