Search results

ok so i built a leakdown tester. i got 2 psi in it and hear a big pop. Not sure what i did to it but it didnt sound good. I'm hoping the pop was a good thing lol. I think it was the gasket i made to cover the exhaust hole. What is everyone using to plug the hole? i cut up a tube. is there...

Hey guys I made this thing in about 5 minutes after i got all the parts. it was extremely simple. 1 brass T one tire valve. one 1/4 inch hose. a few adapters from 1/4 to 1/2 to a piece of 1 1/4 PVC reducer. some pipe tape and a pressure gauge. I found all at lowes. I also got a cut off that was...

Also going to do a quick compression test between the 2 it should throw out the red flags if any

got to thinking before i disassemble this thing i am going to do a leak down test. Good idea?

First time rebuilder. Got hosed on a "good deal" from a friend. Redoing it the best i can. Lots of frustrations and learning curves

Going to take it apart again on Wednesday. See what else i can do to it. I will be walking though step by step with manual again and Ken's video's I'll take pics and videos and post soon as i get to it

2003 Tors removed, parking break removed. Still using injector pump, lid still on the airbox. I typically ride in the 750-1000 ft above sea level. the woodruff key is the one under the flywheel right?

Big question. I'm stuck, Read all i can and still cant figure it out. Watched videos you name it. Problem. I just got my top end bored out 20 over to 66.5 crank and rod were good no cracks or damage to it. nice and tight. New gaskets. reassembled took my time with it made sure to oil and lube...

1) What type of aftermarket exhaust do you have? FMF Gold series w/ Powercore2 2) What type of airfilter do you have? Uni Dual 3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all. Stock with lid 4) What is your elevation...