Search results

  1. B

    1999 upgrade

    Brake conversion looks good, I recently tried my hand at one with warrior parts, had a damaged frame laying around for the tabs, pretty much same concept as yours just has a warrior/raptor master mounting bolt style rather than the blaster, For the shock conversion most people don't use the...
  2. B

    310RD Main Jet? I'm Running Lean?

    I see no mention of pre mix and or stock oil injection being used, If pre mix double check that the oil injection nipple is blocked off on carb body.
  3. B

    Balancer gear spun?

    so you don't mind damaging bearings to remove/replace - Gotcha, Good luck with that..
  4. B

    Sad news in the Blaster world.

    Sorry to hear brotha, Stay Positive!
  5. B

    Balancer gear spun?

    where did the penny in gears come from, thats asking to kill bearings and or damage parts, the proper tools go a long way..
  6. B

    New rebuild help

    Poor Materials for sleeve- soft- casting slag left behind in ports could come free and cause damage, Improper port timing and port dimensions compared to oem, Its china....
  7. B

    Fresh rebuild issues…

    You will forever chase yourself if you are trying to use stock jetting settings with aftermarket pipe and + the port work , I run a oem stroke/bore ported cyl with a modded/shaved oem head and I'm running a 310 main and its barely fat enough without doing a plug chop to confirm- just finished...
  8. B

    Yfz450 front end on blaster

    What all was required to make the arms work
  9. B

    FMF flange

    Best bet is to keep an eye on ebay, I bought 3+ flanges last year alone
  10. B

    Defective Sleeve?

    China Materials at its finest - Its because it was a 66 bore then enlarged to be sold as a ( big bore ).. you have a paper weight now.
  11. B

    The Tavern - Your Chatter Feed

    Happy New Year!!
  12. B

    In need of a FMF exhaust flange

    Best way to find one is to search feebay daily for blaster parts.
  13. B

    250 full rebuild

    Any air leak in a 2 stroke will cause a lean condition, some more worse than others depending on where and how severe the leak is, I see signs of 4 corner seize on that piston pictured, improper warm up prior to riding with an air leak will cause all kinds of piston wear/damage.
  14. B

    Kickstarter nut

    Hit it with your purse... kidding, I use an impact because some people don't know what torque specs or a torque tool is..
  15. B

    No power

    I use the OEM VM26SS Mikuni carb, very easy to tune and adjust
  16. B

    Help with engine housings

    If a Piston broke it was not due to rpm- pistons break due to the bore being too large for the piston- the piston moves around in the bore and snap, to properly repair your machine, new bearings. seals, yamabond4 for case halves, flywheel puller, case splitter, crank install tool, have your...
  17. B

    No power

    Oem carb or china junk
  18. B

    Bubba did it again!

    Pretty Much best approach you have ^ , Hope its not too bad inside the cases!
  19. B

    2021bigboreblaster

    Looks Peachy Clean!!!
  20. B

    2021bigboreblaster

    Welcome! Sounds like a stout Build, Looking forward to progress pics!