Search results

Thanks. I figured out that the ball bearing was missing. I ordered a new one and now that issue is resolved. Only issue I'm having now is that the quad doesn't want to shift into 2nd and beyond. I installed the spring washer and everything correctly. Could it be that the quad has to be warmed...

Thank you. I picked up these products and removed the residue. I installed my clutch plates but I think I may have damaged something. Perhaps you might have an idea what is going on. I had to screw the push rod into the center of the pressure plate all the way in to get the correct adjustment...

Hi Everyone, I have a Barnett Dirt Digger clutch that I'm finally installing after all these years. I took a look at my clutch basket and it needs to be replaced. Will a replacement OEM basket be sufficient? I'm not so sure I want to mess with drilling rivets to install a different aftermarket...

Hi Everyone, I'm replacing the clutch in my '02 Blaster and I'm wondering what methods you folks recommend for removing old pieces of gasket that are sticking to the case? I carefully took a razor blade to it with some success, but I don't want to risk damaging the metal. Any solvents I should...

Thanks for following up. My only engine modifications are an FMF Fatty / Power Core II, running a 270 main jet. I mostly ride trails, so nothing too extreme. I found the oil/gas ratio information in a Clymer manual I bought for the Blaster many years ago. I know how to plug chop and may resort...

Hi Folks, It's been a looonnnggg time since I've been on this forum, or kept up with the moto-world! But I have to say, it feels great to be back! Anyways, I'm considering installing an oil injector block-off kit since my blaster is getting up there in age. I've read some mixed opinions about...

i assume it is because the wires run from the switch to the light but I will have to open it up and look if everythying is connected. What wires should be connected on the inside? Thanks for the quick response btw

Hi, i have a slight problem with the headlight on my 02. It works fine, but the switch does not seem to work. It doesn't matter if the switch is on high, low,or off, the light always shines. Could this be a faulty switch or do you think the light was wired this way by the previous owner? thx

I just picked up some EBC brake shoes on ebay for a good price. They work great

damn. oh well, i guess you gotta learn from mistakes. Thanks for the help guys

I used the stock bolts. I didnt even consider that about the old gasket residue. I guess I will have to open it back up. I have only rode once with the new gasket for about 20 min. Will the gasket still be ok to use? thx for the help

I just recently replaced my clutch cover gasket. I have less leaking but there is one weird thing that is happening. Two of the bolts where the cover is mounted to the crankcase has oil leaking from the seam. I don't understand why this is happening. Does the gasket need time to be broken in or...

ok, thx for the quick reply

I have a quick question. What size are the screws that secure the front fenders to the frame? thx

cool. thx for the help

yea. I had read ealier about how mounting was difficult. Is it true that the master cylinder tends to come loose? nice sig btw lol

Hi all. I've always had trouble with the rear caliper sinse day one. I know blasters are notorious for having bad rear brakes, but I'm tired of not being able to use them. I was wondering if anyone has ordered the hydraulic brake conversion kit and if it is easy to install. If not, what other...

thanks for the help

I just bought yamalube trans-oil plus. It says it is for use in two stroke motorcycle gear box/ transmissions. It says 20W40API. Is this oil safe to use? thanks

ok. thx for the help, much appreciated