01yfs200blaster New Member Sep 8, 2017 9 0 12 24 Sep 16, 2017 #1 My blaster has no compression. Has new namura piston and gaskets kit. Has spark. No leaks. Has no compression. Anyone know what my issue Is?
My blaster has no compression. Has new namura piston and gaskets kit. Has spark. No leaks. Has no compression. Anyone know what my issue Is?
M Markblaster Custom blaster Dec 6, 2015 2,311 760 175 Sep 16, 2017 #2 Did you have the bore measured and machine for the piston? Piston rings installed? Reactions: OConnor Racing
speedyslyder 2 STROKES RULE Technician Feb 14, 2014 4,274 828 178 43 massachusetts Sep 16, 2017 #3 how much compression is none a finger on the kicker or a thumb over the spark plug hole lol? check it with a compression gauge it should be at 120psi Reactions: OConnor Racing and Markblaster
how much compression is none a finger on the kicker or a thumb over the spark plug hole lol? check it with a compression gauge it should be at 120psi
M Markblaster Custom blaster Dec 6, 2015 2,311 760 175 Sep 16, 2017 #4 No leaks? Did you use a leak tester? Reactions: OConnor Racing
01yfs200blaster New Member Sep 8, 2017 9 0 12 24 Sep 16, 2017 #5 I can turn the kicker with my hand. It resists a little bit. And I don't have a leak tester. How do i know if my reeds are bad?
I can turn the kicker with my hand. It resists a little bit. And I don't have a leak tester. How do i know if my reeds are bad?
speedyslyder 2 STROKES RULE Technician Feb 14, 2014 4,274 828 178 43 massachusetts Sep 16, 2017 #7 01yfs200blaster said: I can turn the kicker with my hand. It resists a little bit. And I don't have a leak tester. How do i know if my reeds are bad? Click to expand... free manual have a look first http://www.blasterforum.com/threads...ervice-and-owner-manuals-free-download.17325/
01yfs200blaster said: I can turn the kicker with my hand. It resists a little bit. And I don't have a leak tester. How do i know if my reeds are bad? Click to expand... free manual have a look first http://www.blasterforum.com/threads...ervice-and-owner-manuals-free-download.17325/
M Markblaster Custom blaster Dec 6, 2015 2,311 760 175 Sep 17, 2017 #8 Leak tester. http://www.blasterforum.com/threads/leakdown-testers.55015/ Video on how to do leak test. http://www.blasterforum.com/threads/leak-down-test-video.57629/ Reactions: moefie35
Leak tester. http://www.blasterforum.com/threads/leakdown-testers.55015/ Video on how to do leak test. http://www.blasterforum.com/threads/leak-down-test-video.57629/
Blaaster Moderator Staff member Technician Jul 18, 2011 15,384 1,120 165 eastern australia Sep 20, 2017 #9 Did you check the ring end gap before fitting the rings. Was the cylinder measured to see if it was within specs. Reactions: moefie35 and OConnor Racing
Did you check the ring end gap before fitting the rings. Was the cylinder measured to see if it was within specs.