Whats worth getting off of a Banshee that is a upgrade to the Blaster ?

Rear axle, tires/rims, rear hubs, front hubs/spindles/calipers etc, front master cyl, steering stem can be machined to fit blaster and make it a +2 longer i think..

In reply to everything mentioned above, rear axle only if your Blaster is 03-06. Otherwise you need an 03-06 Blaster carrier, Blaster/Banshee brake hub and hydraulic caliper for it to work. Front spindles only if you have aftermarket A arms with tapered stud type upper ball joint. Otherwise you need 03-06 Blaster spindles or KOR conversion spindles. Banshee front shocks are a little better than Blaster front shocks if you can get them cheap/free. Front wheels are the same bolt pattern.

Yes if you have stock a arms, if aftermarket than just diff ball joints.. Also be carefull of the rear hubs. Most are 115x4 which than you can have more of an option for rear rims/tires since 9" tires are more abundent. There is a 4/156 rear hub that wad on an 89-90 only banshee... real nice if you like a big hub.. Hard to find though.