Hello everyone, I am trying to do a hydraulic rear brake conversion and would like to know which brake caliper would be the best and easiest to work with. All help would be greatly appreciated. Thanks
Rear brake question
- Thread starter love the dunes
- Start date
switching to the newer year blaster rear caliper would be the easiest. just need the new carrier to mount.
the hardest part is attaching the master cylinder at the right angle and with the correct amount of push
the hardest part is attaching the master cylinder at the right angle and with the correct amount of push
My carrier just got powder coated so I don't want to switch that, just wondering what caliper most people end up using?
Mastercylinder is already test fitted and mounted.
Mastercylinder is already test fitted and mounted.
Well for the kit that member Awk08 made, he used gsxr calipers and masters. but he's not building them until further notice.
basically any caliper is going to be the same amount of work if you are not switching carriers
basically any caliper is going to be the same amount of work if you are not switching carriers
Use a Banshee rear caliper and an East Coast ATV aluminum bracket. Done. As long as you still have the early Blaster axle with the floating brake disc.
mainly 04 05 06 calipers like this one
http://www.ebay.com/itm/04-05-SUZUK...-I9-/331638487671?hash=item4d3731ba77&vxp=mtr
I fitted one from a 08 gsxr 750 I believe it looks alittle different and is a dual piston but I made a bracket to fit it on there
http://www.ebay.com/itm/04-05-SUZUK...-I9-/331638487671?hash=item4d3731ba77&vxp=mtr
I fitted one from a 08 gsxr 750 I believe it looks alittle different and is a dual piston but I made a bracket to fit it on there
Similar threads
