I need some new heel guards . I found some new yfz 450r take offs on ebay for cheap . Anyone get these to work ? Maybe a little fab work will be needed . http://www.ebay.com/itm/YFZ-450R-45...014-/251526714936?hash=item3a90291638&vxp=mtr
Heel guards
- Thread starter 82cutty
- Start date
lots of us use them or raptors, bolt right onto your pegs, may need a small bracket to get the top mounted to your frame
Cool..they look like they would fit without much fab work . I ordered a set . Also like the wider foot peg they come with
the pegs they come with are nice but won't bolt onto our frames, they can be cut off their mounts and bolted or welded to the back of our pegs
Got them today and put them on . Still have to make up a mount for the foot brake . The new pegs are huge compared to the stockers .
Nice, how did you mount the pegs? Ive been thinking about getting the same set-up. I don't currently have a welder or welding skills but have signed up for classes at a local tech school so I can start fabbing my own stuff.
Thanks...to get the pegs on I drilled out 1 hole a little bigger on each side . You might have to drill out both holes . That gave me enough for the right spacing .The blaster is just a touch narrower . And you need to make some brackets for the top mount of the heel guards to the bike . I used 1/4in. steel flat bar... bend and drill to get to fit to the blaster . You also need longer bolts on the kicker side...10mm x 40 x 1.25 pitch . And will need to fab up a mount to get the rear brake pedal to work if you want rear brakes . I'll get that done when I get a chance
Last edited:
What kind of prepping did you do on that steel? The picture isnt clear but it looks like paint was still on it
Also the bead looks quite erratic. I hope you trust your welds
Also the bead looks quite erratic. I hope you trust your welds
Just ordered a pair with the foot pegs. Bought a welder yesterday so Im gonna start practicing and hopefully I can get it done myself by time they show up.
