I just rebuilt my blaster it has an aggressive trail port, dyno port exhaust and a milled head compression is about 160 psi I am running a mikuni tm flat slide and need an idea of where I should be for jetting
Currently I have a 270 main, 17.5 pilot and stock needle in the 3rd clip.
This is how it was jetted when I got it and the top end blew I'm thinking I should be around a 35 pilot with maybe a 290 or 300 main? Any ideas?
Currently I have a 270 main, 17.5 pilot and stock needle in the 3rd clip.
This is how it was jetted when I got it and the top end blew I'm thinking I should be around a 35 pilot with maybe a 290 or 300 main? Any ideas?