Official Blaster Photos Thread

Blasters in their natural habitat
mJvzX19.jpg

AXd6beB.jpg

kzHmNJM.jpg
 
Yes no feet protection lol i havent got my nerf bars in yet its winter not planning to ride until my new jets and bars are in my old ones well lets just say theyve seen better days any one know a good site to buy front end widing kits ive seen a site selling them for 139 is that a good price also ive got the ski conversons on order ill post pics when it comes in!!
 
I have actually been looking at that diamondjcustoms kit. It's a 179.00 and made from 1/4 steel. From everything I have read online people are motocrossing on them and have had no issues. You can get it with 4.5" or 6" wider. Will probably have to go with longer brake cables if you go 6" tho. Anyone on here used one of their kits?
Edit: 189.00 actually
http://m.ebay.com/itm/180715801013?nav=SEARCH

Blaaster has used it and if he replies to this i bet you a penny to pinch he will say "i have used and it with no problems"
 
Kit used with no problems other than the tie rod extensions on the + 6 bending.

Good idea to get longer tie rods.

You can use the stock lines with the +6 but the banjos that fit on the callipers have to be re positioned!

The extra bump steer that the kit introduces can be combatted by adding 1/4" of toe out.

It is a great idea to fit a steering stabiliser, as the wider stance makes it hard on the wrists!

image.jpg
 
  • Like
Reactions: Built Modiphyd
2003 blaster fully modded stage 3 jet kits vortech carbon reeds extended swing arm no tors crap all taken off no oil mix blue led under glow 14 tooth sprocket open air box racing coil pack over 4k invested runs like a champ
 
no got it for 1500 and it was a total mess his mix was so hi it was shooting out of the flange sand in the tank tors was fried but now she is a work of art also has ITP hole shot rims and tires only thing that was not done was bbk
 
no got it for 1500 and it was a total mess his mix was so hi it was shooting out of the flange sand in the tank tors was fried but now she is a work of art also has ITP hole shot rims and tires only thing that was not done was bbk
So you mean you have it ported, head mod, different carb, upgraded shocks and a-arms?
 
So you mean you have it ported, head mod, different carb, upgraded shocks and a-arms?
um not the a arms just stabalize them i did the trans carb reeds brakes swing arm bearings coil stator ignition chain break lines took tors system out along with oil pump and mix bottle fmf jets fmf pipe and silencer power core 2 i run it 32:1 high octane and fuel stabalizer installed hour meter along with led lights 4 6 inch strips with 12v batt under seat completly water proof next is to tear back down and paint the frame and a arms hubs painted blue fires up on first kick