Many of you all have found out that stock a arms do not have replaceable ball joints. If you have stock a arms and need upper ball joints here is a link below it is to synder motorsports they sell replaceable ball joints for aftermarket a arms however they can be used on the stock a arms the only modification that needs to be done is to cut the ends off the a arms and weld a piece of dom tubing on the a arm. this is the same as the lower a arms.
here is the upper ball joints:https://p.secure.hostingprod.com/@w...et/ssl/shop/index.php?categoryID=105&offset=8
you can also google yamaha blaster upper ball joints and click on images and its the 1st picture.
here is the modifications needed to install the ball joints:
http://bansheehq.com/forums/index.php?showtopic=105318&st=0
here is the upper ball joints:https://p.secure.hostingprod.com/@w...et/ssl/shop/index.php?categoryID=105&offset=8
you can also google yamaha blaster upper ball joints and click on images and its the 1st picture.
here is the modifications needed to install the ball joints:
http://bansheehq.com/forums/index.php?showtopic=105318&st=0
Last edited: