Wider a arms

blaster003

Member

May 13, 2014

253

12

54

24

• Oct 11, 2014

• #1

Does anyone know if a different bikes stock a arms will fit on the blaster with little mods I was gonna build my own but I don't know what size hiem joints or replaceable ball joints to get

 

L

Larry's Shee

Active Member

Technician

May 23, 2009

9,271

1,057

149

Ortskaville, MI

• Oct 11, 2014

• #2

None, Blaster=Blaster

 

79 bronco

Moderator & Self Custom Psycho

Staff member

Apr 9, 2010

5,420

774

178

47

I don"t know???????

• Oct 11, 2014

• #3

A arms from a yamaha blaster knockoff may fit! Like a kasea skyhawk 250, and there are other knockoffs!

 

blaster003

Member

May 13, 2014

253

12

54

24

• Oct 11, 2014

• #4

Ok does anyone know what size hiem joints and tie rod type ball joints I would need

 

BlasterFun484

Member

Mar 23, 2013

689

148

96

Collegeville, PA

• Oct 11, 2014

• #5

the Mojave is another blaster knockoff, most parts that I can think of are interchangable

 

jus_me

Active Member

Aug 8, 2012

3,594

517

177

N.Y

• Oct 11, 2014

• #6

If you are good at modification than you may want to try the yfz450 a arm modification. It consists of modifying the A arm mounts on the blaster frame. These was a good write up about it somewhere with measurements but I cant find it.

 

blaster003

Member

May 13, 2014

253

12

54

24

• Oct 11, 2014

• #7

What is needed for the yfz a arm coversion

 

blaster003

Member

May 13, 2014

253

12

54

24

• Oct 11, 2014

• #8

I think I'm going to build my own size tubing do I need? I want the tubing to be the same size as the stock ones I also want to use hiem joints for the bushing part where the a arms mount to the frame what size do I need in those? and what size of hiem ball joints for the upper and lower a arms? If anyone could send me a link or give me the sizes I need thanks

 

Herpderplol

BRRAAAAAAAAAPP

Aug 22, 2012

6,290

496

136

26

Dickinson, ND

• Oct 11, 2014

• #9

blaster003 said:

I think I'm going to build my own size tubing do I need? I want the tubing to be the same size as the stock ones I also want to use hiem joints for the bushing part where the a arms mount to the frame what size do I need in those? and what size of hiem ball joints for the upper and lower a arms? If anyone could send me a link or give me the sizes I need thanks

Click to expand...

measuring the stock tubing would be the easiest way to find out the size... just saying...

i say go on the ASR website and order some joints from them. not 100% sure you can do it, but i would think they tell the sizes in a description about their arms

 

bansheedave

Active Member

Nov 4, 2010

2,162

449

140

• Oct 11, 2014

• #10

The hiems are 3/4 inch and you can buy them right off ebay in a set of 4.

 

blaster003

Member

May 13, 2014

253

12

54

24

• Oct 13, 2014

• #11

where can i get a set of 14mm upper pinch style ball joints that are adjustable i think im just going to cut the ends off the stock a arms and weld a threaded piece of tubing on the end but i cant find the pinch style ball joints if anyone can send me a link thanks

 

L

Larry's Shee

Active Member

Technician

May 23, 2009

9,271

1,057

149

Ortskaville, MI

• Oct 14, 2014

• #12

blaster003 said:

where can i get a set of 14mm upper pinch style ball joints that are adjustable i think im just going to cut the ends off the stock a arms and weld a threaded piece of tubing on the end but i cant find the pinch style ball joints if anyone can send me a link thanks

Click to expand...

Don't think you can safely add much width to stock arms.
Search threads by sicivicdude, was making extended arms, he came across some pinch joints that worked.