sketchy ebay seller????

awk08

bought this anodized gas cap from "xtc racing" out of michigan on the 20th, ordered a silicon intake boot from china the same day, guess which one came late last week, yeah clean from china!!!!,
sent 2 letters to xtc, finally got an answer on sunday, saying they would check the status and get back with me today, or they would reship me a new one

well they didnt respond today, sent them another message today demanding to know where my cap is, or i'm gonna file a paypal complaint by weeks end???
and was also told they dont provide tracking numbers???

so even if they did or didnt send the original, or send out a new one today??? their communication sucks!!!
and i'd suggest paying the few extra bucks and getting the "tusk" equivalant gas cap

i'll never recommend or do business with them again!!!!!

banshee blaster yfz450 raptor warrior yz yzf gas cap : eBay Motors (item 220548998029 end time Feb-06-10 17:18:53 PST)

__________________

Ken Oconnor Racing mx/trail port/head mod
"Hot Rods" crank and mains,
"Wiseco" 67mm pro lite forged piston,
"SMS" allen head bolt kit, Banshee petcock, 5/8" fuel line, Keihin 34mm pj , "Pro Design" intake, V-force 3's, "CFM" airbox, "UNI" pod filter, "Factory7" pipe /"LRD"silencer,
"Works" dual rate shocks, '05 trx450r rear shock w/ "ken oconnor bushings"
"DG" bumper, "Renthal" race bend bars, "Oury" grips, "Denton" steering stabilizer, 13/40 gearing,
"Pure Sports Bandits" on "ITP's" up front
20" "Pure Sports Bandits", on 10" "ITP"s, out back
"Awk's" custom fabbed - polished airscoops, oil block off, full skidplate, double footpegs,
"awks" complete gsxr rear hydro kit
front hydro's - banshee master/rappy660 calipers/norman420 spindles
http://www.kenoconnorracing.com/
http://www.blasterforum.com/engine-1...47/#post358200

yb200

file a claim on paypal if they dont have a tracking # you will get your money back

awk08

gonna give them a day or two yet, maybe they'll send 2, then i'll rub that in their face!!!!!!

__________________

Ken Oconnor Racing mx/trail port/head mod
"Hot Rods" crank and mains,
"Wiseco" 67mm pro lite forged piston,
"SMS" allen head bolt kit, Banshee petcock, 5/8" fuel line, Keihin 34mm pj , "Pro Design" intake, V-force 3's, "CFM" airbox, "UNI" pod filter, "Factory7" pipe /"LRD"silencer,
"Works" dual rate shocks, '05 trx450r rear shock w/ "ken oconnor bushings"
"DG" bumper, "Renthal" race bend bars, "Oury" grips, "Denton" steering stabilizer, 13/40 gearing,
"Pure Sports Bandits" on "ITP's" up front
20" "Pure Sports Bandits", on 10" "ITP"s, out back
"Awk's" custom fabbed - polished airscoops, oil block off, full skidplate, double footpegs,
"awks" complete gsxr rear hydro kit
front hydro's - banshee master/rappy660 calipers/norman420 spindles
http://www.kenoconnorracing.com/
http://www.blasterforum.com/engine-1...47/#post358200

iadubber

make sure you file a paypal within 30 days of purchase or you will get screwed. Give them a couple days then do that.

__________________
95/03 Blaster
Pretty Plain
Razr MXs
UNI Filter
Animal Grips
Frame Skidplates

tjsdaname

on question... did you order a blue or orange one?.......

__________________
My youtube:
http://www.youtube.com/user/tjsdaname

awk08

no, red one to match all my other red stuff....painted frame, shock body's & hubs,
anodized lugnuts, valve stem caps and oil fill cap

__________________

Ken Oconnor Racing mx/trail port/head mod
"Hot Rods" crank and mains,
"Wiseco" 67mm pro lite forged piston,
"SMS" allen head bolt kit, Banshee petcock, 5/8" fuel line, Keihin 34mm pj , "Pro Design" intake, V-force 3's, "CFM" airbox, "UNI" pod filter, "Factory7" pipe /"LRD"silencer,
"Works" dual rate shocks, '05 trx450r rear shock w/ "ken oconnor bushings"
"DG" bumper, "Renthal" race bend bars, "Oury" grips, "Denton" steering stabilizer, 13/40 gearing,
"Pure Sports Bandits" on "ITP's" up front
20" "Pure Sports Bandits", on 10" "ITP"s, out back
"Awk's" custom fabbed - polished airscoops, oil block off, full skidplate, double footpegs,
"awks" complete gsxr rear hydro kit
front hydro's - banshee master/rappy660 calipers/norman420 spindles
http://www.kenoconnorracing.com/
http://www.blasterforum.com/engine-1...47/#post358200

xKroniK13x

Looks like a legit seller to me...

__________________


2006 Special Edition Blaster
----
Toomey B1 Pipe/Silencer - ASV's All Around - Project Blaster Air Scoops - Toomey/Uni High-Flow Air Filter - Airbox Mod - DG Alloy Series Nerf Bars - Fast Trekker Rear Tires - Primary Drive Chain/Sprocket Kit - Maier Hand Guards - Pro Taper Grips - Custom Metal Heel Guards - Removed Warning Labels - LSR Emergency Brake Block-off Plate - Fresh Bore/Hone - All Balls Rear Axle Bearings - 310 main jet - Custom Nerf bar Nets - Custom Heel Guard Plastic Patch-up
----
My Rebuild Topic
----
Adopted by Mr. and Mrs. 305.

Please visit: http://www.fearless-labs.com

lasxgames

whats the min to file with pal pal $20 or $25
Thier feeback does not seem to bad for non ships

__________________
http://www.hookit.com/Members/lasxgames/Default.aspx
http://www.sponsorhouse.com/Members/lasxgames


2005 blaster 200cc motor Factory 7 Fire-Breather 200cc Cylinder Kit-, Milled head, Project blaster green race plastic Project blaster vented hood, DG National Series Front Bumper: DG National Grab Bar, Moose Billet Thumb Throttle , Gibson Stearing dampner ,DuraBlue Eliminator Axle, ROLL DESIGN ATV Steering Stem, Fasst Flex Bars with anti vib dampners, 30mm Kiehn carb, reed spacer, v-force 3 reeds, American Star Long Shock A-Arms, 4 Douglas beadlock rims , 2 Razor rear tires,2 Front ITP Holeshot MXR Tires 19x6x10,
Gas cap carbon fiber, Extreme Manufacturing Pro Peg Nerf Bars, Project Blaster Factory Aluminum Airbox, American Star new +4 roundhouse swing arm, rear Elka long travel duale rate rezi shock, front Triple Rate elka shocks/remote rezzi dual adj, notrology hot wire coil, lightend flywheel, barrenet clutch kevlar, after market inner and outer HD clutch basket,AMP RESEARCH LINK, Magura Hydraulic Clutch

awk08

i thought they looked legit too, and have been watching them for months now, so they're not new to the game, but they're shipping time and communication sucks!!!!!
and you know me, i'll "call out" the pope

__________________

Ken Oconnor Racing mx/trail port/head mod
"Hot Rods" crank and mains,
"Wiseco" 67mm pro lite forged piston,
"SMS" allen head bolt kit, Banshee petcock, 5/8" fuel line, Keihin 34mm pj , "Pro Design" intake, V-force 3's, "CFM" airbox, "UNI" pod filter, "Factory7" pipe /"LRD"silencer,
"Works" dual rate shocks, '05 trx450r rear shock w/ "ken oconnor bushings"
"DG" bumper, "Renthal" race bend bars, "Oury" grips, "Denton" steering stabilizer, 13/40 gearing,
"Pure Sports Bandits" on "ITP's" up front
20" "Pure Sports Bandits", on 10" "ITP"s, out back
"Awk's" custom fabbed - polished airscoops, oil block off, full skidplate, double footpegs,
"awks" complete gsxr rear hydro kit
front hydro's - banshee master/rappy660 calipers/norman420 spindles
http://www.kenoconnorracing.com/
http://www.blasterforum.com/engine-1...47/#post358200

245stroker

probably your typical ebay seller, anxious to get payed then take there time shipping the item. Send them a message that they have until thurs or friday then your gonna file a paypal claim. that should get them motivated

__________________

Chrome won't get you home but it'll get you laid
'04 blaster- ported by Mumms the Word
'88 trx250r - building
'01 cr125 - stock