Recent content by WheelerDealer94

  1. WheelerDealer94

    WRIST PIN BEARING

    Would the exact size for a yamaha blaster all stock be - ( 16mm x 21mm x 22.5mm )
  2. WheelerDealer94

    REED VALVE CHANGE

    Thanks a bunch!
  3. WheelerDealer94

    REED VALVE CHANGE

    I'm buying new reeds for my blaster, nothing fancy - I'm buying these one's I was told they are best for stock engines. But i am wondering about installing them, I was told you can put them in wrong? I just want some verification on how to Boyesen 630 Power Reed
  4. WheelerDealer94

    CYLINDER STUDS

    thats a fine price, where can I order?
  5. WheelerDealer94

    CYLINDER STUDS

    How long would they be exactly?
  6. WheelerDealer94

    CYLINDER STUDS

    3 of my cylinder studs are stripped, and buying studs are extremely expensive every i have looked. I was just wondering if anyone knows the exact size of the studs so I can go to a shop and see if they the exact size. thanks
  7. WheelerDealer94

    BLASTER, REBUILD, PLUG CHOP

    I'm about to rebuild my blaster engine, new piston, rings, AND NEW cylinder. Should I do a plug chop shortly after my rebuild? I am cleaning the carb and may buy a new kit just because of new engine.
  8. WheelerDealer94

    Head nuts, size, dimensions? Need help!!

    excellent, also, the side casing bolts do you know the exact dimensions for those to? I'm having trouble finding the exact size
  9. WheelerDealer94

    head bolt???

    Right on!! Thanks so much, i had a good feeling about them.
  10. WheelerDealer94

    Head nuts, size, dimensions? Need help!!

    Looking for the exact size and what nut will fit properly
  11. WheelerDealer94

    head bolt???

    I bought these nuts for my Yamaha blaster, will they fit properly? http://www.ebay.com/itm/121481328127 The nut size I bought is M8X1.25mm
  12. WheelerDealer94

    how to plug chop

    Ok i'll order that wrench, I have a torque socket wrench here, but don't torque to specs? is it 20 ft pnds?
  13. WheelerDealer94

    how to plug chop

    i cant really get torque wrench on the bolts
  14. WheelerDealer94

    how to plug chop

    Quite a process for all this aha, thanks! Do i have to torque the head down?
  15. WheelerDealer94

    how to plug chop

    My blaster is fully stock, only thing that has been changed is I removed the Oil injection pump. bought a standard 66MM piston rings and brand new cylinder. Once I install everything before I run it should I do any adjusting to my carb because of the oil pump removal?
See more
Top Bottom
Back