Recent content by TTRi23

Thanks alot man

Ok do u know the part number for the float needle and how much it is. I couldnt find but then again I didnt even know the name of it until now.

What is that metal clip thing attached to the needle in the photo. The one in my carb is broke! P.S I know it attaches to the floats and the needle.

I got a 89 or 90 blaster and I dont think I am getting spark. Some times in the past i'd get the blaster running and then it would just cut out and die. Well I decided to check the spark and I noticed I cant see any spark at all on the plug. So I took a light tester and hooked them to each...

In the carb there is floats and a pin goes through the float to hold them in place above the little needle thing right? Then there is a little metal thing that slips over part of the floats and then its also attached to the needle thing. Sorry not sure if it makes sense I tried to find the...

Well I noticed today my kickstart stays down after you kick it. So I am guessing the spring is broke or bent. I am just gonna replace it. My question is do I need to split the case or do I just take off the clutch cover and its there or what? Thanks.

I wanna see if I can get one thats stock and not .40 over. Also gonna check to see if I can get it local.

Well I think the quickest way to get this motor up and going is to buy a cylinder and have it ported and bore it out.

Really? I thought they came ported already? The motor had the big bore kit on it but it got swiped and replaced with a 80 over cylinder :( well again thanks for the info.

Its probably a shifter kart then right? Anyway where u located it shouldnt be to hard to find one.

Well first i'd find out whats wrong with the current block. but I am seeing engines go on ebay for 300+. I also agree with the above post. You could probably find some one who would trade a good running blaster straight across for that gokart you have.

I dont know. But around here on craigslist I can buy blasters from 1000 and up.. Ones that run. So basicly your getting a rolling chassis with a blown motor(lower end).

Just curious to what other motors have people seen in blasters!!! OR better yet what motors will fit in the frame with little modification?

If anyone has one and needs to get rid of it let me know.

I got a IT200 I wonder what parts would interchange? Cylinder,head???