Recent content by Shakeel

Thanks bro! Appreciate it

Blaster crazy. Thnk u and God bless u as well

Guys.. I don't know how to thank u.. I really appreciate all the tips and advise in getting my bike sorted. Thanks a mil. Esp you Nick. God bless

Bike has hydraulic brake system. The issue was at the parking break. I pulled the sensor as per the pic I posted. Then traced the wire down to the plug under the hood. Pulled that switch and it runs like a dream again.

10000 South African rands lol. Will check the starter wiring in a bit n confirm. Thanks again for all the help

Saw a video on YouTube and the guy shows how to disconnect the tors. He pulls the plug that leads from the throttle on top of the car that leads to the 'harness' then snips the wires n joins them together. That's the harness wire not the one linked to the throttle. Any ideas if this would work?

R10000.00 goin rate for blaster in SA 10-15k

The guy I bought the bike from said its a 2010 model. Gona try n drain the fuel and oil out and check frm there. Would like to know more bout the tors and how to take it out. Not too technically inclined if u know what I mean.

Thanks for all ur help nick. This bike has got me puzzled tho, like I mentioned it's my first bike and I'm going thru the bike bit by bit. I've cleaned the carb out, changed the plug. My parking break sensor seems to just clip out..unless I removed the wrong thing lol. Still does the same thing...

Thanks a mil again guys for all the help. Come to think of it. I haven't used the parking break until just before I washed the bike. I'm new in the bike scene and this is my first bike. Will try diconnecting the parking break and or sensor.

Changed the plug as well. Tried riding the bike but the minute I hit the throttle the bike bogs and sounds like it's dying out. Change gears and it moves but still very slow. I've just taken the carb off and cleaned it out. Put it back together and still the same. Starts up perfectly, idles but...

Hi nick, thanks for the reply. It was idling while I washed it. Idled for bout 5min then switched it off. Dried the bike off and tried to start it after about 5min that's when I noticed there was no power.

Hi guys, yesterday I took my blaster for a spin and used the bike for about 3 hours. The bike was dirty and thought I'd give it a wash. I used a high pressure hose. Let's the bike to idle and washed it off. Switched it off to dry. Started it and now when I try and accelerate there's no power...