sam0840
Reaction score
2

Joined
Last seen

Profile posts Latest activity Postings About

  • hey man, posted pics of the seat in the thread its going to ebay if your not intrested
    All you need to do is send kor those 88 spindles and he can modify them.The 88and89 spindles are different than the 90-02 spindles.YOu will be fine and they spindles can be done with no issues.
    I wish I knew that thay came from Jay.lol Those were on banshee spindles and the banshee ,blaster03-06,kor spindles all have the same bolt pattern so they should fit with no problems.I will double check the measurement but you should be fine and ready to use them.
    My front brake lines are two separate lines lines from the master cylinder. They don't use the stock separator because those lines are pressed together from the factory. If you buy extended brake lines they will either be two separate ones like mine or they will come with a new t-junction for the new lines. By the way, I bought mine off of ebay for $70. Hope this helps
  • Loading…
  • Loading…
  • Loading…