InfamousBlaster
Last Seen:
May 6, 2018
Joined:
Oct 21, 2009
Messages:
79
Likes Received:
4
Trophy Points:
35
Media:
1
Location:
Bridgeport, CT

Share This Page

InfamousBlaster

Member, from Bridgeport, CT

InfamousBlaster was last seen:
May 6, 2018
    1. 2002blaster1984
      2002blaster1984
      i need help man maybe u can help me out i have a blaster and wen i kick it it has no spark but wen i have the gas all the way in it has spark but wont start i was wonderin if u could help me i just want to ride and i cant lol
    2. DUALSTROKE
      DUALSTROKE
      Yes the sleeve is setup as the same stock 12 port layout.It's the only sleeve that works for this cylinder and only available through vitos(some others sell it but it comes from vitos).Get the sleeve installed and ready to go,unless you want to get full potential and add some porting.LMK Thanks
    3. Wildcard2
      Wildcard2
      It's going to depend on the crank being installed. I charge $175 for complete teardown/assembly labor. That includes teardown/cleaning/inspecting/reasembling the engine and the required case sealant. Seals and gaskets are extra, as well as any parts found to be worn or broken. If the crank is a +4mm or larger stroke I charge $75 for case trenching plus price of epoxy work for larger than 4mm. Let me know if there is anything I can do to help you out.

      -Brandon
    4. mr_3_0_5
      mr_3_0_5
      its not paint. it powdercoated. chrome first then transparent blue.
    5. blasterfreek30
      blasterfreek30
      check out projectblaster.com......they sell them
    6. yb200
      yb200
      better get back to me soon on that swingarm i have 5 ppl watching on ebay....as soon as one person bids its gone
    7. yb200
      yb200
      i sooner you get the money the better
    8. yb200
      yb200
      it is on ebay but if you buy it i can take it off
    9. yb200
      yb200
      alright let me know
    10. yb200
      yb200
      did you want to buy it?
    11. yb200
      yb200
      i got it from another member it was broke but i welded it up and fixed it.. so its good to go better then it was before it broke..if i was you i would swap the bearing and stuff from your stock swing arm
    12. yb200
      yb200
      i have the black one thats in the fs section
    13. 89custom
      89custom
      no 90 for the set of tires OR rims, together 170+shiping
    14. Wildcard2
      Wildcard2
      What pipe are you running currently?
    15. Wildcard2
      Wildcard2
      To get the most from the porting it needs to be matched to a good pipe and have the head re-worked. The blasters stock head design is very de-tuned. It has a very deep conical combustion chamber and a very wide steep angled squish band. I do a complete re-design of the chamber and squish band, It allows the motor to rev out like a 200cc two stroke should while still maintaining the bottom to mid power.
    16. InfamousBlaster
      InfamousBlaster
      Head mods???$50???(explain).... I don't do drag racing or anything like that I just want the most speed and power from my bike... I have a Toomey pipe and a 14T sprocket..
    17. Wildcard2
      Wildcard2
      What type of riding do you use the blaster for? Porting starts at $125 and goes up from there, head mods are $50 when purchased with porting. Prices don't include return shipping.

      -Brandon
  • Loading...
  • Loading...
  • About

    Location:
    Bridgeport, CT
    Riding my blaster!
  • Loading...