Recent content by Hatekrimes

So should i use the needle out of the blaster in it?? I dont see what the diffrences are

H Ow would the needle be so diffrent??? Arnt they all just needles with clips u can adjust?? I lowrred clip all the way down to make it richer but it made it way too rich fouled my plugs plus would barely idle lol

Its weird because the main jet that came with the carb says 130 something and its the same size as my stock 230 blaster main jet but diffrent #??? Is it because its a dirtbike??? And what jet should i go with? Should i go about 10 up on numbers like if its a 130 then get a 140??

Carb

Yeah I Think your right buddy i got it hot today put a new plug in and ran it down the road and its badically white!!! But its a mikuni carb 28mm so will those jets your talking about work?? And i had to use the dirtbike throttle cable so idk what needle is in it. The stock jetting is dame size...

Yeah its weird the plug test i did was a nice cardboard brown... plus i ride some trails for about 3 hours and she did great!! Kept up with my buddys on dirtbikes. I tell ya thst bigger carb eith no air box lid and a k&n style filter really woke it up... jus need a exhaust and some better tires...

Any news on the project?

Ive also unhooked the oil pump and im premixing 32:1 with lucas oil. Waiting on my clutch cover gasket before i can install my oil pump delete kit i got in the mail already.

Hey guys so i my stock carb was messing up needs a rebuild. So my buddy had a basically brand yz 85 carb and it fit right on there its actually a 28mm. So i switched it over my jet wouldnt fit in there its made firrently but my pilot jet did. Anyway both the main jets are the same sized wholr...

My pilot jet didnt have a spring...just a o ring around ot

So little update. She runs fine. I fized the problem.. wasnt anything major it was exactly as i thought guys... a screw fell out of the small stater. Was locking it up on the inside of the flywheel. U could see the grooves. So i got the screw out. Screwed it BACK in the stater lol!! And she purs...

Also it dousnt seem tohave much oil in the tranny and it looks kinda brown and milky a little? Maybe the gasket is leaking and its low on oil and maybe got some water in there

Guys i think a stater screw is missing check out this pic. I couldnt pull the flywheel because i have no tool but ima try to find one tomorroe at the local scooter/ go kart store. Then i can get in there and really,see whats going on

Well its not locked up. It runs and drives itd just the kicker makes a grinding noise only sometimes when u kick it.. not sll thr time but some strokes it makes a grinding noise. So im thinking if i change out the oil and stuff there might be some metal shards from transmission in the oil. And...

Only happpens wheni kick it