Recent content by bobc

Re: DT200R Squish -update Bike now rebuilt , head skimmed .5mm, cylinder bored out to 66.8 ports cleaned and bevelled and Wossner piston fitted . These pistons are really well made , I have used wiseco and narita pistons in the past ,the wossner weighs 10g more than the wiseco , about same...

Thanks for the info guys, I will let you know how it goes , Cheers Bob

I dropped the head and barrel off at the machine shop tonight , should have it back within a week. I decided to shave the head while they were on the job, -0.5mm written in big letters , my Greek is not brilliant so fingers crossed . I can still experiment with base gaskets , I have just made a...

Thanks for the reply Joe , I did the measurement side to side . My base gasket is .5mm , the only proper gasket material I have is 1mm , would liquid gasket do the job? or shall I go ahead with shaving the head ? Bob

Hi Guys , I am fairly new to the forum and apologise for coming straight in with a cry for help, I have a DT200 and live in Cyprus so rely on outside advice and you seem to have more professional bikers used to DT/blaster motors than anywhere. I have cleaned the barrel & head ready for a...