Are these parts interchangeable?
- Thread starter Chuckthizzle
- Start date
Herp your one hell of a helper man you inspired me to get my hands dirty I started pulling out the carb tonight. I worked 16 hrs today at work but still came home and worked on the quad a bit. So those 2 parts will bolt right up? On top of the carb I could not get this piece loose idk what it is
I cant click on the image.... Try uploading them this way
http://www.blasterforum.com/general-support-17/how-post-picture-photobucket-55659/
Its never failed on me yet.
http://www.blasterforum.com/general-support-17/how-post-picture-photobucket-55659/
Its never failed on me yet.
and is this the air filter? it smelled like strong gasoline and had some oil like substance on the bottom of it
http://i418.photobucket.com/albums/pp261/Charlys_Angel07/2013-06-09232031.jpg
The 2 tubes coming from the carb bottom right of this picture are really oily and connect to nothing :-/
If you are trying to get the thing off the top of the carb. Unhook the little black hose on the other side, then pull the whole carb out by the bottom, tipping it a little as you pull it out
Once its out, get a good grip and take off the top.
The big brick is the TORs (throttle override system) that everyone removes.
And yes thats the airfilter..... You need a new one
i suggest this Air Filter 1988 2006 Yamaha Blaster 200 YFS200 YFS 200 More Air Flow | eBay
Havent tried the brand, but its the same as k&n so i think its fine, otherwise get uni or k&n it you are uneasy about it
http://www.ebay.com/itm/Yamaha-Blas...Parts_Accessories&hash=item5d325236a2&vxp=mtr
http://www.ebay.com/itm/K-N-high-fl...Parts_Accessories&hash=item51adccdd5e&vxp=mtr
Once its out, get a good grip and take off the top.
The big brick is the TORs (throttle override system) that everyone removes.
And yes thats the airfilter..... You need a new one
i suggest this Air Filter 1988 2006 Yamaha Blaster 200 YFS200 YFS 200 More Air Flow | eBay
Havent tried the brand, but its the same as k&n so i think its fine, otherwise get uni or k&n it you are uneasy about it
http://www.ebay.com/itm/Yamaha-Blas...Parts_Accessories&hash=item5d325236a2&vxp=mtr
http://www.ebay.com/itm/K-N-high-fl...Parts_Accessories&hash=item51adccdd5e&vxp=mtr
Last edited by a moderator:
Wait, take a picture of the other side... they litt hose should be connected... Or is it pre-mix?
The two hoses that go to nothing are vents. Quite common to have some oil on and around carb after a period of time. It's from the fuel splashing/evaporating out of carb. Unless the filter is damaged, clean it, oil it, run it.
IMO, I'd be leary of K&N knockoffs
IMO, I'd be leary of K&N knockoffs
Ok got it off there was a black tube going to the other side of the quad into the engine cover that has YAMAHA ON IT
