Everything You Need Link List **NEW**

B

BlasterUk

Guest
First of all if your new and reading this..Welcome to Blaster Forums.. I joined here about a month ago and the community are great.. They would jump through hoops of fire to help you fix your blaster!!

All Links You Need : -


How To Remove Your Throttle Overide System :-

How To Remove Your TORS - Yamaha Blaster Forum
The Throttle Overide System or TORS, Has been known to fault very easy.. It would be a good idea to remove it asap to prevent any errors with your blaster ;)

How To Clean Your Carb : -

http://www.blasterforum.com/do-yourself/254-how-clean-your-carbureutor.html
I clean my carb atleast once every 2 weeks.. It helps you find problems before they occour and isnt as complicated as you would think.. I would recommend this to anyone who recently bought an older blaster that dosn't runs so well!!

How To Install An Oil Block Off Kit : -

How To Install Oil Injection Block Off Kit - Yamaha Blaster Forum
Basically the Oil Injection System on Blasters has been known to fail from time to time.. What this means is your engine could SIEZE.. Which is BAD.. I would suggest you remove your Oil Injection asap and premix your gas to what ever ratio you like 1:32 is most common..!

How To Remove/Install Reeds : -

How To Remove/Install Reeds - Yamaha Blaster Forum
The stock reeds on blasters also have been known to "crack" or fail generally.. "Mine cracked last week" I would suggest gettin new reeds.. Or a whole new block/reeds if you want a reliable blaster ;)

How To Read Spark Plug Colours : -

How To Read Spark Plug Colors - Yamaha Blaster Forum
This guide helps alot when your mod your blaster and your preparing to reject.. Remember its better to be to rich than to lean!! Lean is bad!! ;)


Guide To Tire Chioce On Your Blaster : -

4X4REVIEW.COM - ATV's: 5 Steps to Selecting the Right Tire for Your ATV
This guide should help if your buying new tires.. Bigger for Top Speed.. Smaller for Acceleration!! Basically!!

How To Shave Your Fenders : -

How To Shave Your Fenders (ATV) - Yamaha Blaster Forum
I'm personally a big fan of fender shaving.. Its a cheap and easy way to make your blaster look how you want it!! Not recommend if your ride wet dirt tracks ;)

How To Repack Your Aftermarket Silencer : -

How To Re-Pack Your Silencer (w/ Steel Wool) - Yamaha Blaster Forum
I havn't done this help but it has helped alot of people beofore.. Read up!! ;)

How To Rebuild Your Front Hubs (Older Blaster) : -

How To Rebuild Your Front Hubs - Yamaha Blaster Forum
Loosing braking power in your front hubs? I would suggest buying some new shoes and a a hub rebuild...!! ;)

I hope this helps all you new guy/girls...

If your need anything else use the "Search" button...
 
Last edited by a moderator:
lol i saw ur lil


"Still havn't been caught by the police!!"


and thot i would share my lil story i live in cali,usa and i was out riding around my small town and well saw a sherffi behind me so i started to go to where my friends were(at a park) and well i saked them should i run or stay they all yelled GOGOGOGo and i was like wtf just 1 cop rite....WRONG... i look down the street two cops and look behind me a sherffi and look ed down the other street and two sherffi well i RAN and got away from them all so ya fun times i am having out here
 
lol that storie always ends up being i tried to run away but my bike broke. never fails, when you get chased by the cops and you run for it something always goes wrong luckily this didn't happen to you
 
hey i got one for ya. im replacing the jug and piston on the blaster. i think i know, but does the wrist pin need to be pressed in? im thinking no, why the crclips then? any help would be greatly appreceited! thanks -beaks
 
Hey guys out there, look my laptop crashed and i am really never on the computer but can still use my email. but any way i am in desprate need of money and i am trying to sell my 2000Honda xr 100 for $900. I live in south jersey. I do not have enought posts to post in the for sale bc i am not on enoguh. because my phone wont allow me to use the internet but email is okay so pass this around. Its a 2000Honda XR100 wit a FMF POWER CORE 4 EXHAUST and runs better then any new 4 stroke trail bike. My email is jreynolds44@rocketmail.com and as much as i would want you to P.M. me i wont recieve it for a good time so please email =)

P.S. i will send pictures if requested (you will not be dissapointed)
 
Hey guys out there, look my laptop crashed and i am really never on the computer but can still use my email. but any way i am in desprate need of money and i am trying to sell my 2000Honda xr 100 for $900. I live in south jersey. I do not have enought posts to post in the for sale bc i am not on enoguh. because my phone wont allow me to use the internet but email is okay so pass this around. Its a 2000Honda XR100 wit a FMF POWER CORE 4 EXHAUST and runs better then any new 4 stroke trail bike. My email is jreynolds44@rocketmail.com and as much as i would want you to P.M. me i wont recieve it for a good time so please email =)

P.S. i will send pictures if requested (you will not be dissapointed)

anyone repsonding to this guy, DO NOT except shipping it. only in person.
 
hey i got one for ya. im replacing the jug and piston on the blaster. i think i know, but does the wrist pin need to be pressed in? im thinking no, why the crclips then? any help would be greatly appreceited! thanks -beaks

hey dude. No just Push the pin through. then put the circlips it pretty simple
i think