Issue with Mikuni carb! Won't Start. Please advise.

brandoz28

there's a box under the hood, and there are some wires that need to be removed. do a search, its been covered a lot

__________________
F7 Pipe, Powercore2 silencer w/steel wool packing, 14/40 gearing, Banshee rear brake, Wiseco 67.25 piston, Wiseco crank assembly, Boyesen pro series reeds, PE Clutch basket, 30mm OKO Carb, Oil injection delete, Uni air filter, AC Racing front bumper, '86 250R rear shock, Works Triple Rates with remote rezzies, DG nerfs

blasterdude14

well with the 38mm carb there shouldnt be any tors
but to check there is a little box that is mounted right above the cdi, trace the wires from that little box and see if they are connected to anything

__________________
Blaster is gone, replaced with way bigger off road fun machine lol
1995 Jeep Grand Cherokee Limited AWD I6 motor

josealvrz11

Yeah after looking at how to remove TORS article I don't believe it's installed.

blasterdude14

ok thats good then
well i recommend that you try to sell the 38mm carb and go down to at least a 28mm
Also have you checked for spark, are the reeds good?

__________________
Blaster is gone, replaced with way bigger off road fun machine lol
1995 Jeep Grand Cherokee Limited AWD I6 motor

josealvrz11

So after all this do you think the blaster can run OK with this setup?

brandoz28

its going to be really really boggy down low, if the bike is stock its going to run horrible. i'd try to sell it and get a smaller carb like bd said. something around 28-30mm

__________________
F7 Pipe, Powercore2 silencer w/steel wool packing, 14/40 gearing, Banshee rear brake, Wiseco 67.25 piston, Wiseco crank assembly, Boyesen pro series reeds, PE Clutch basket, 30mm OKO Carb, Oil injection delete, Uni air filter, AC Racing front bumper, '86 250R rear shock, Works Triple Rates with remote rezzies, DG nerfs

josealvrz11

Where can I find a good one at a reasonable price?

brandoz28

ebay. the 28mm oko carbs can be had brand new for cheap

__________________
F7 Pipe, Powercore2 silencer w/steel wool packing, 14/40 gearing, Banshee rear brake, Wiseco 67.25 piston, Wiseco crank assembly, Boyesen pro series reeds, PE Clutch basket, 30mm OKO Carb, Oil injection delete, Uni air filter, AC Racing front bumper, '86 250R rear shock, Works Triple Rates with remote rezzies, DG nerfs

josealvrz11

I searched ebay for it but, all 28mm OKO carbs are coming from Taiwan. Are those good?