June 2009 BOTM Entries

cbaber · 06-02-2009, 06:27 AM

Entries for Blaster Of The Month (June 2009) are now open!

Please make sure you have read the following thread before creating your entry.
"

Blaster Of The Month Entry Details, Rules and Requirements...

"

Have a great time and GOOD LUCK!

03Blaster · 06-02-2009, 07:16 PM

Chassis | Suspension | Controls:

A Arms: stock
Swingarm: swingarmshop +4
Steering Stem: stock
Stabilizer: none
Axle: banshee
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: stock
Throttle/Clutch Lever: polished from rockymountainatv.com
Grips: stock
Nerfs: tusk
Bumper: stock
Grab Bar: Snyder Motorsports Polished Aluminum
Front Shocks: 400ex
Rear Shock: yfz450 bill balance edition
Brake Lines: front and rear steal braided brake lines/burgard
Rotors F|R: stock
Rims F|R: stock
Tires F|R: ITP holeshot rears, stock fronts
Body: stock
Frame: stock
Plastic: black and red stock
Graphics|Seat Cover: none/stock
Number Backgrounds: none
Handguards: none
Bar Pad: none
Fuel Tank: stock

Engine|Drive System:

Cylinder|Head: ported and polished/milled head from kennedy power sports
Bore & Stroke: .20 over and stock stroke
Displacement: 198cc
Cam: hahahaha???
Carburetor: 35mm airstriker
Air Filter|Box: Factory 7 Hologram Aluminum Airbox/ uni filter
Pipe|Silencer: vitos fat bastard
Clutch|Plates: vitos perfermance clutch with heady duty springs
Gearing F|R: 14-40
CDI|Killswitch: stock
Cooling: air
Other:V-Force 3 Reed Cage, wiseco piston, vito's oil block off, 3* timing mod, 6" front widening kit, 35mm intake boot,

tjsdaname · 06-05-2009, 02:33 PM

Chassis | Suspension | Controls:

1. A Arms: burgard +2+1
2. Swingarm: SMS +3
3. Steering Stem: janseen +1 anti vibe
4. Stabilizer: none
5. Axle: G-force
6. Carrier: SMS round housing
7. Locknut:G-force
8. Hubs F|R:stock | aftermarket, but not sure what brand.
9. Bars: pro taper contour
10. Throttle/Clutch Lever:stock | F7
11. Grips: pro taper pillow tops
12. Nerfs:graydon proline
13. Bumper:tusk comp series
14. Grab Bar:stock
15. Front Shocks: internally shortened yfz (stock shock length)
16. Rear Shock:re-sprung z400 (thats why the spring is blue)
17. Brake Lines:burgard
18. Rotors F|R:stock
19. Rims F|R:itp reinforced | itp beadlocks
20. Tires F|R:itp holeshots | itp quadcross MX pro

Body:

1. Frame:stock
2. Plastic:blue maier vented race front
3. Graphics|Seat Cover:stock
4. Number Backgrounds: none
5. Handguards: none
6. Bar Pad:none
7. Fuel Tank:stock

Engine|Drive System:

1. Cylinder|Head:extreme ported | milled
2. Bore & Stroke: stock
3. Displacement:stock
4. Cam:?????
5. Carburetor:35mm airstriker
6. Air Filter|Box:UNI | CFM
7. Pipe|Silencer:factory 7
8. Clutch|Plates:not sure what brand.
9. Gearing F|R:14/38
10. CDI|Killswitch:stock | pro armor tether / yz style kill button
11. Cooling:air???
12. Other:vito's reed spacer, V-Force 3 Reed Cage, wiseco piston, vito's oil block off, adjustable ignition stator, Pro Design intake,

specialized7 · 06-05-2009, 02:56 PM

Chassis | Suspension | Controls:

A Arms: stock
Swingarm: chopped up
Steering Stem: stock
Axle: stock
Hubs F|R: stock
Bars: moose race bend
Throttle/Clutch Lever: polished
Grips: pro grip
Nerfs: DG
Bumper: Blingstar
Grab Bar: custom bent
Front Shocks: progressive 512's
Rear Shock: 400ex
Brake Lines: new oem
Rims F|R: ITP T-9's
Tires F|R: Kenda dominators all around
Body: Maier race front plastic, 03 hood and light, raptor 700 rear fender
Frame: stock
Plastic: blue?
Graphics|Seat Cover: on order
Handguards: Acerbis
Bar Pad:Moose racing

Engine|Drive System:

Cylinder|Head: stock right now, have a 240 kit w/kennedy power porting sitting here
Bore & Stroke: stock and 240
Carburetor: Stock & 35mm airstriker
Air Filter|Box: Custom airbox w/scoop K&N with precharger and outerwears airbox lid
Pipe|Silencer: FmF fatty with Procircuit pipe
Clutch|Plates: Oem
Gearing F|R: 14-39
CDI|Killswitch: stock
Cooling: air and scoops
Other: oil block off, full skids, Trail Tech, polished clutch cover, polished oi pump cover, case saver

06-02-2009, 06:27 AM	#1 (permalink)
cbaber Administrator Join Date: Apr 2007 Location: Missouri, USA Posts: 356 Rep Power: 44 Reputation:	June 2009 BOTM Entries Entries for Blaster Of The Month (June 2009) are now open! Please make sure you have read the following thread before creating your entry. " Blaster Of The Month Entry Details, Rules and Requirements... Blaster Of The Month Entry Details, Rules and Requirements... " Have a great time and GOOD LUCK! __________________ Like this forum? Why not support it? ----------------------------------------- If you benefit from using this forum and would like to see more contests then support it. A Supporting Member subscription is $10 a year and you get the badge under my screen name, plus more capabilities! Click here.

06-02-2009, 07:16 PM	#2 (permalink)
03Blaster Regular Join Date: Aug 2008 Posts: 75 Rep Power: 24 Reputation:	Re: June 2009 BOTM Entries Chassis \| Suspension \| Controls: A Arms: stock Swingarm: swingarmshop +4 Steering Stem: stock Stabilizer: none Axle: banshee Carrier: stock Locknut: stock Hubs F\|R: stock Bars: stock Throttle/Clutch Lever: polished from rockymountainatv.com Grips: stock Nerfs: tusk Bumper: stock Grab Bar: Snyder Motorsports Polished Aluminum Front Shocks: 400ex Rear Shock: yfz450 bill balance edition Brake Lines: front and rear steal braided brake lines/burgard Rotors F\|R: stock Rims F\|R: stock Tires F\|R: ITP holeshot rears, stock fronts Body: stock Frame: stock Plastic: black and red stock Graphics\|Seat Cover: none/stock Number Backgrounds: none Handguards: none Bar Pad: none Fuel Tank: stock Engine\|Drive System: Cylinder\|Head: ported and polished/milled head from kennedy power sports Bore & Stroke: .20 over and stock stroke Displacement: 198cc Cam: hahahaha??? Carburetor: 35mm airstriker Air Filter\|Box: Factory 7 Hologram Aluminum Airbox/ uni filter Pipe\|Silencer: vitos fat bastard Clutch\|Plates: vitos perfermance clutch with heady duty springs Gearing F\|R: 14-40 CDI\|Killswitch: stock Cooling: air Other:V-Force 3 Reed Cage, wiseco piston, vito's oil block off, 3* timing mod, 6" front widening kit, 35mm intake boot, __________________ 2003 yamaha blaster 200cc K&N air filter vforce 3 reeds 4* timing advance vitos fat bastard full exhaust +6 diamond Js front widening kit +4 swingarm YFZ450 rear shock 400ex front shocks 20x11x8 ITP holeshot rear tires tusk nerf bars 270 main jet banshee rear axle

06-05-2009, 02:33 PM	#3 (permalink)
tjsdaname idk what to say... Join Date: Oct 2007 Location: C.R. IA Age: 16 Posts: 2,659 Rep Power: 61 Reputation:	Re: June 2009 BOTM Entries Chassis \| Suspension \| Controls: 1. A Arms: burgard +2+1 2. Swingarm: SMS +3 3. Steering Stem: janseen +1 anti vibe 4. Stabilizer: none 5. Axle: G-force 6. Carrier: SMS round housing 7. Locknut:G-force 8. Hubs F\|R:stock \| aftermarket, but not sure what brand. 9. Bars: pro taper contour 10. Throttle/Clutch Lever:stock \| F7 11. Grips: pro taper pillow tops 12. Nerfs:graydon proline 13. Bumper:tusk comp series 14. Grab Bar:stock 15. Front Shocks: internally shortened yfz (stock shock length) 16. Rear Shock:re-sprung z400 (thats why the spring is blue) 17. Brake Lines:burgard 18. Rotors F\|R:stock 19. Rims F\|R:itp reinforced \| itp beadlocks 20. Tires F\|R:itp holeshots \| itp quadcross MX pro Body: 1. Frame:stock 2. Plastic:blue maier vented race front 3. Graphics\|Seat Cover:stock 4. Number Backgrounds: none 5. Handguards: none 6. Bar Pad:none 7. Fuel Tank:stock Engine\|Drive System: 1. Cylinder\|Head:extreme ported \| milled 2. Bore & Stroke: stock 3. Displacement:stock 4. Cam:????? 5. Carburetor:35mm airstriker 6. Air Filter\|Box:UNI \| CFM 7. Pipe\|Silencer:factory 7 8. Clutch\|Plates:not sure what brand. 9. Gearing F\|R:14/38 10. CDI\|Killswitch:stock \| pro armor tether / yz style kill button 11. Cooling:air??? 12. Other:vito's reed spacer, V-Force 3 Reed Cage, wiseco piston, vito's oil block off, adjustable ignition stator, Pro Design intake,

06-05-2009, 02:56 PM	#4 (permalink)
specialized7 Banned Join Date: May 2008 Location: Saskatoon Canada Posts: 3,063 Rep Power: 58 Reputation:	Re: June 2009 BOTM Entries Chassis \| Suspension \| Controls: A Arms: stock Swingarm: chopped up Steering Stem: stock Axle: stock Hubs F\|R: stock Bars: moose race bend Throttle/Clutch Lever: polished Grips: pro grip Nerfs: DG Bumper: Blingstar Grab Bar: custom bent Front Shocks: progressive 512's Rear Shock: 400ex Brake Lines: new oem Rims F\|R: ITP T-9's Tires F\|R: Kenda dominators all around Body: Maier race front plastic, 03 hood and light, raptor 700 rear fender Frame: stock Plastic: blue? Graphics\|Seat Cover: on order Handguards: Acerbis Bar Pad:Moose racing Engine\|Drive System: Cylinder\|Head: stock right now, have a 240 kit w/kennedy power porting sitting here Bore & Stroke: stock and 240 Carburetor: Stock & 35mm airstriker Air Filter\|Box: Custom airbox w/scoop K&N with precharger and outerwears airbox lid Pipe\|Silencer: FmF fatty with Procircuit pipe Clutch\|Plates: Oem Gearing F\|R: 14-39 CDI\|Killswitch: stock Cooling: air and scoops Other: oil block off, full skids, Trail Tech, polished clutch cover, polished oi pump cover, case saver __________________ Trail Ported 240 Blaster Build Log

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Sponsored links

Sponsored links